Euphonix 840-08758-02 manual

Page 4

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

16)Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.

17)To completely disconnect this equipment from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

18)The mains plug of the power supply cord shall remain readily operable.

19)This unit is provided with a power supply cord set suitable for 120V AC input only (for U.S.A. and Canada). For other than U.S.A. and Canada, a qualified person must provide for use with this unit, an appropriate, approved power supply cord set which is in compliance with the end use country requirements and has a minimum cross-sectional area of 1.0mm2.

20)For units with more than one power cord:

Caution: This unit has more than one power supply cord. Disconnect two power supply cords before servicing to avoid electrical shock.

Attention: Cet appareil comporte plus d’un cordon d’alimentation. Afin de prévenir les chocs électriques, débrancher les deux cordons d’alimentation avant de faire le dépannage.

21) Operator Accessible Fuse:

Caution: For continued protection against risk of fire, replace only with same type and rating of fuse.

Attention: Pour ne pas compromettre la protection contre les risques d’incendie, remplacer par un fusible de même type et de même caractéristiques nominales.

Image 4
Contents Control Surface Manual Page Important Safety Instructions Page Table of Contents List of Figures System Startup Sequence Description OverviewRear Panels KeyboardSelf Test Procedure Switch and Knob TestMomentary Switch Press Initiating Self TestLED Test Fader TestDisplay Test Memory TestSelecting and Adjusting the Onscreen Display Touchscreen Alignment Double-touchElo TouchscreenEuphonix Max Air Control Surface Manual Changing the ID of a CM416 Module System Ethernet IP AddressesPower Technical SpecificationsEnvironmental Requirements Dimensions Dimensions in inchesCM404 Bottom Dimensions User Reference Internal ComponentsFans