Euphonix 840-08758-02 manual System Startup Sequence Description, Overview

Euphonix Max Air Control Surface Manual

System Startup Sequence

See page 21 in the Max Air Operation Manual for the system startup sequence.

Description

The Max Air Console consists of a configurable number of Control Modules that com- prise the Control Surface. The Max Air Control Surface is the digital control center for all Max Air system components and communicates with them via Ethernet network connections. Control signals are transmitted via the Ethernet switch and distributed to the Max Air system components. No audio passes through the Control Surface.

Overview

The Max Air console must contain a CM404 center section module and can have up to three fully loaded CM416 16-channel Modules, each with 16 physical faders. The system can have up to 48 faders, not including the eight faders in the CM404 master section. The CM416HL and CM416HR are half-loaded (left or right) 8-fader modules that can be used to expand your system.

CM416	CM404	CM416
Sixteen-channel Module	Center Section	Sixteen-channel Module

Figure 1 Typical Console Layout

7