Multiquip EM-900SDCE Mixer Safety Message Alert Symbols, If you do not follow these directions

Page 4

EM-900SDCE MIXER — SAFETY MESSAGE ALERT SYMBOLS

FORYOUR SAFETY AND THE SAFETY OF OTHERS!

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.

NOTE

This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of Multiquip's EM-900SDCE mixer. For specific engine operating questions, please refer to the engine manufacturers instructions for data relative to its safe operation.

Before using this MIXER, ensure that the operating individual has read and understands all instructions in this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.

HAZARD SYMBOLS

Lethal Exhaust Gases

Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.

Explosive Fuel

Diesel fuel is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames. NEVER use fuel as a cleaning agent.

DANGER

You WILL be KILLED or SERIOUSLY INJURED

if you DO NOT follow these directions.

WARNING

You CAN be KILLED or SERIOUSLY INJURED if

you DO NOT follow these directions.

Burn Hazards

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. Never operate the engine with heat shields or heat guards removed.

Rotating Parts

CAUTION

You CAN be INJURED if you DO NOT follow these directions.

Potential hazards associated with MIXER operation will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.

NEVER operate mixer with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

This MIXER, other property, or the

NOTE surrounding environment could be damaged if you do not follow instructions.

PAGE 4 — MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07)

Image 4
Contents Model EM-900SD 10-11 16-1719-20 26-29Page EM-900SDCE Mixer Safety Message Alert Symbols If you do not follow these directionsYou do not follow these directions You can be Injured if you do not follow these directionsEM-900SDCE Mixer Safety Message Alert Symbols Always wear approved respiratory protectionEM-900SDCE Mixer Operation and Safety Decals Machine Safety DecalsEM-900SDCE Mixer Operation and Safety Decals Accordance with EN Wilmington Avenue, Carson, California’s E2457499 through E2457518 Model Name/NumberEM-900SDCE Mixer Specifications Accordance with our established policy of constantGeneral Safety EM-900SDCE Mixer Rules for Safe OperationStop the engine when leaving the mixer unattended Always know the location of the nearest and first aid kitEM-900SDCE Mixer General Information GeneralBefore Starting OIL Levels HardwareEM-900SDCE Mixer Engine Components Initial ServicingEM-900SDCE Mixer Controls and Components Tires This unit employes the use of soild rubber tiresEM-900SDCE Mixer Paddle Blade Adjustment Engine OIL FuelZerk Grease Fittings Lubricants Clutch OIL EM-900SDCE Mixer InspectionGear Reduction OIL Transmission Startingthe Engine MixingAdd water, and mix compound to desired consistency Operational. Any binding of materialEM-900SDCE Mixer Maintenance EM-900SDCE Mixer Maintenance RefertoFigure13 forsteps 5Athrough 5FSympton Possible Problem Solution EM-900SDCE Mixer -TOUBLESHOOTING ENGINE/MIXER Fuel tank empty? Replace fuel filter Fuel filter clogged?Page Sample Parts List Indicated by Includes Items W/unique symbolExplanation of Code in Remarks Column Indicated byEM-900SDCE Mixer Suggested Spare Parts EM-900SDCE Mixer Name Plate and Decals EM-900SDCE Name Plate and Decals EM-900SDCE Name Plate and Decals Decal no MAINT.WHEN Running Decal do not Clean MixerDecal Dangerous Fumes Decal EYE ProtectionEM-900SDCE Mixer Mixing Drum Assembly Adjustment Bolt Safety BARPaddle Shaft HANDLE, DumpEM-900SDCE Mixer Paddle Shaft Assembly Paddle CAST, Center Engine END INSERT, Paddle ARMPaddle CAST, Engine END BOLT, END PaddlesEM-900SDCE Mixer Cabinet Assy Includes Items W Cabinet AssyRubber Protector EM-900SDCE Mixer Frame Assy Frame Assy Drum LatchSPRING, Compression WASHER, Flat 3/4EM-900SDCE Mixer Hatz Engine Assy 1B30 5062576109170 EM963692EM-900SDCE -TRANSMISSION Assy Main Transmission Housing Shifter ShaftSeal ClutchyokeTerms and Conditions of Sale Parts Freight PolicyPage United States Mexico United KingdomCanada Brazil Your Local Dealer is
Related manuals
Manual 44 pages 61.51 Kb

EM-900SD specifications

The Multiquip EM-900SD is a robust and highly efficient industrial generator designed to deliver reliable power for various applications. Known for its durability and versatility, this generator is ideal for construction sites, events, and emergency backup solutions. Equipped with a powerful engine and advanced features, the EM-900SD addresses the needs of professionals seeking a dependable power source.

One of the standout features of the EM-900SD is its impressive power output. With a maximum power rating of 900 watts, this generator ensures that users can operate multiple devices and tools simultaneously without any drop in performance. It incorporates a highly efficient engine that provides excellent fuel economy, enabling long operation times on a single tank of fuel. This is particularly beneficial for those working in remote locations where access to refueling may be limited.

In terms of technology, the EM-900SD is equipped with a digital inverter system. This innovative feature provides clean and stable power, making it suitable for sensitive electronic devices such as laptops and medical equipment. The inverter technology also minimizes harmonic distortion, ensuring that the power delivered is both safe and efficient. Additionally, the generator boasts a quiet operation, making it an excellent choice for noise-sensitive environments.

The construction of the EM-900SD is built to withstand tough working conditions. It features a robust frame and durable components designed to endure the rigors of job sites. The generator is also designed for easy transport, with a lightweight and compact design that allows it to be moved effortlessly. Furthermore, it has an intuitive control panel that provides users with easy access to essential functions such as power output monitoring and fuel level indicators.

Safety is a priority in the EM-900SD's design. It incorporates several safety features including overload protection and automatic shutoff systems that prevent potential damage to the generator or connected devices. This ensures peace of mind for users, knowing that they are operating within safe parameters.

Overall, the Multiquip EM-900SD stands out as a premier choice for those in need of a reliable and efficient power solution. With its blend of performance, technology, and safety, it meets the demands of a wide range of applications, making it an indispensable tool for professionals in various industries. Whether in construction, outdoor events, or as a backup power source, the EM-900SD delivers exceptional value and reliability.