Trane Physical Dimensions, and 60 Hz SI English Units, Figure PD-1 -ModelCVGF Cooling Only

Physical Dimensions

		50 and 60 Hz SI (English Units)
Figure PD-1 –Model CVGF Cooling Only	Figure PD-2 –Model CVGF Cooling Only Without Unit-Mounted
With Unit-Mounted Starter	Starter (for Remote-Mounted Starter)

Dimensions – SI Units (English Units)

		Clearance			Unit Dimensions		Unit Dimensions
		Tube Pull		With Unit Mounted Starters			Without Unit Mounted Starters
Comp	Shell Size	CL1	CL2	Length		Height	Width	Width
400-500	500	4235 mm	1118 mm	4083 mm		2094 mm	1984 mm	1929 mm
		(13' 10 3/4")	(3' 8")	(13'	4 3/4")	(6' 101/2")	(6' 6 1/8")	(6' 3 15/16")
500	700	4235 mm	1850 mm	4083 mm		2200 mm	2038 mm	1988 mm
		13' 10 3/4")	(3' 11")	(13' 4 3/4")		(7' 2 5/8")	(6' 8 1/4")	(6' 6 1/4")
650	700	4235 mm	1850 mm	4083 mm		2270 mm	2083 mm	2076 mm
		13' 10 3/4")	(3' 11")	(13' 4 3/4")		(7' 5 3/8")	(6' 10")	(6' 9 3/4")
800-1000	1000	4235 mm	1219 mm	4083 mm		2521 mm	2305 mm	2257 mm
		13' 10 3/4")	(4')	(13' 4 3/4")		(8' 3 1/4")	(7' 6 3/4")	(7' 4 7/8")

CL1 at either end of machine and is required for tube pull clearance.

CL2 is always at the opposite end of machine from CL1 and is for water box plus clearance.

–Recommended clearance (D1) for machine with unit mounted starter is 914 mm (36”)

–Recommended clearance (D2) for machine without unit mounted starter is 1219 mm (38”) Unit length is not included for the waterbox.

See page 23 for waterbox dimension

22 CTV-PRC001-E4