Alesis 16 manual LED Meters, Power Indicator, +48V Indicator

Page 21

A Tour of the MultiMix USB2.0 2

LED Meters

These are the two rows of yellow, green and red lights you see in the master section of the mixer. They are very versatile, allowing you to view the signal level of the main mix, individual channels (both pre- and post-fader) and aux returns depending on which signal you have routed to the control room mix.

POWER Indicator

When this LED is lit up, that means the POWER ON switch on the rear of the mixer has been activated.

+48V Indicator

When this one is lit up, that means the PHANTOM ON switch on the rear of the mixer has been activated and is supplying +48V phantom power to all XLR mic inputs.

19

Image 21
Contents Reference Manual Page Table Of Contents Table Of Contents Chapter Nine Block Diagrams Glossary Contact Chapter Eight SpecificationsTable Of Contents Welcome IntroductionMultiMix USB2.0 Key Features About the MultiMix USB2.0All-In-One Mixer and Multichannel Computer Audio Interface Introduction Additional Features of the MultiMix USB2.0How to Use This Manual Few Words for Beginners This page intentionally left blank Hooking up the MultiMix USB2.0 Getting StartedUsing Proper Cables Setting LevelsGetting Started Patchbay Tour of the MultiMix USB2.0Mic Inputs Channels 1 Line Inputs Channels 1Tour of the MultiMix USB2.0 Line Inputs Channels 9Phone Jack Fader Channel StripsMute / Alt 3/4 PAN or BALAux Master SectionMain Mix Fader Alt 3/4 Fader Solo Mode2TK To Mix Alt 3/4 To MixALT 3/4 Switch MIX Switch2TK Switch Aux Ret a LevelPower Indicator +48V IndicatorLED Meters Rear of the Mixer Digital Effects Processor Effects Section ComponentsEffect Descriptions Chorus Digital Effects ProcessorSimple Live Setup Using Additional External Audio SourcesTraditional Mixing Traditional Mixing Simple Two-Channel Recording Setup without using a computerUSB2.0 Recording First-time connection and driver installation instructionsInstalling the optional applications Power-on/Power off orderUSB2.0 Recording USB2.0 inputs and outputs Channels sent from the MultiMix to the computerChannels returned from the computer to the MultiMix Sound setup under Windows USB2.0 Recording Disabling Windows System Sounds Connections and settings for USB2.0 recording and monitoring Choosing the MultiMix as your audio device Choose the menu option Devices Device Setup…USB2.0 Recording USB2.0 Recording Creating a new audio file USB2.0 Recording USB2.0 Recording USB2.0 Recording Working with the Alesis USB2.0 control panel Accessing the control panelChoose the menu Options Audio… USB2.0 Recording USB2.0 Recording Assigning inputs to audio tracks Using the MultiMix USB2.0 with CoreAudio on the Macintosh Cause Troubleshooting non-USB2.0Effects / AUX RET B Troubleshooting non-USB2.0LED meters not working Computer does not see the MultiMix This page intentionally left blank Basic troubleshooting Troubleshooting USB2.0Audio playback or recording is at the wrong speed Audio playback or recording stutters or drops outTroubleshooting USB2.0 Input Channels SpecificationsComputer Requirements SpecificationsBlock Diagrams Block Diagrams Term GlossaryPage Glossary Trademarks Alesis Contact Information