VocoPro DVG-909K owner manual Mic/Controller Inputs, XLR Inputs, External Controller

Getting connected cont.

MICROPHONE CONNECTIONS

The DVG-909K has three individual microphone channels, each with their own Volume and HI/LOW EQ controls. Each channel has both unbalanced 1/4” and balanced XLR mic inputs.

NOTE: For each channel you cannot be connected to both 1/4” and XLR inputs, you must be connected to one or the other.

Connect by 1/4” mic cable (Fig. A)

Connect the 1/4” end of the microphone cable into one of the UNBALANCED MIC INPUTS on the rear panel of the DVG- 909K. See figure A.

Connect by XLR mic Cable (Fig. B)

Connect the XLR cable’s female end into one of the BALANCED MIC INPUTS on the back of the DVG-909K. See figure B

Mic/Controller

1/4” Inputs

(Fig. A)

XLR Inputs

(Fig. B)

External Controller

(Fig. C)

EXTERNAL CONTROLLER (Fig. C)

The DVG-909K can be connected to an external controller that easily fits into a slant rack case for more convenient opera- tion.

Using the cables that are included with the controller, connect the top connector on the controller to the top connector (DISC TRAY A) on the DVG-909k and connect the bottom connector on the controller to the bottom connector (DISC TRAY B) on the DVG-909K.

12