Troubleshooting, Problem Possible Cause Solution

Troubleshooting

Problem	Possible Cause	Solution

The power does not come on	-The power cord many not be	- Make sure the power cord is plugged
	loose	firmly into the back of the machine.
	-Your power strip/surge protector may	- Make sure that it is in working condi-
	be defective or switched OFF	tion and switched ON

A disc does not play or playback stops	- There may be condensation or dust in	- Use a lens cleaner to clean the disc
immediately.	the disc player.	player.
	-The disc may be dirty or scratched	- Clean the disc or use a different one
		that is not scratched.

No picture	- The player may not be connected	- Consult the “Getting Connected” sec-
	correctly	tion of this manual and try reconnecting
		the video connections.
	- The television/monitor may not	- Make sure the correct video input
	be set to the correct video input mode	mode is set on your TV or monitor.

	- - Is the player in a place with excessive	- Relocate the player to a new location.
The picture is bad	vibration?
		- Consult the “Getting Connected” sec-
	- Are the video connections attached?	tion of this manual and try reconnecting
		the video connections.
	- Is the disc dirty?	-Ensure the disc is not dirty and
		clean it if necessary.
	- Is the DVG-909K connected directly to	- The picture may be bad when used
	a television selector switch or a	with some television sets or projectors,
	television with a built-in video deck?	due to the DVD copy protection scheme
		- The picture quality may also suffer if
		the DVD player is connected through a
		selector switch with other video equip-
		ment. Try turning off the power to the
		other equipment