Scart

Getting Connected

RGB/Component Video HD Outputs

What you will need:

•1 RGB cable

•A High-Deﬁnition TV with RGB or Component (Y, Pb, Pr) video inputs

1.Connect one end of the RGB/Y,Pb,Pr cable to the Y/R, Pb/G, Pr/B jacks on the DVG-777K II’s rear panel

2.Connect the other end of the RGB/Y,Pb,Pr cable to the RGB or Y, Pb, Pr inputs on a High Deﬁnition TV

NOTE: When using the Component output, the DVG-777K II must be set to YPBPR output. See “Changing the Video Output Mode” in the Operations section of this manual for detailed instructions on setting the DVG-777K II to YPBPR Mode.

VGA output

What you will need:

•1 VGA Cable

•A TV or video monitor with a VGA input

1.Connect one end of the VGA cable to the VGA output on the rear panel of the DVG-777K II

2.Connect the other end of the VGA cable to a VGA input jack on a TV or monitor

NOTE: When using the VGA output, the DVG-777K II must be set to VGA output. See “Changing the Video Output Mode” in the Operations section of this manual for detailed instructions on setting the DVG-777K II to VGA Mode.

What you will need:

•1 SCART cable

•A TV or video monitor with a SCART input

1.Connect one end of the SCART cable to the SCART output on the rear panel of the DVG-777K II

2.Connect the other end of the SCART cable to a SCART input jack on a TV or monitor

��

� � �

��