General Operations
To create a playlist in the following order:
1.Track 14
2.Track 7
3.Track 3
4.Track 1
1.Press the PROGRAM button to enter Program mode
2.Press 14 and then ENTER
3.Press 7 and then ENTER
4.Press 3 and then ENTER
5.Press 1 and then ENTER
6.Press PLAY to begin playing in this order
7.Press STOP twice to exit the programmed playlist
Clearing a track in Program Mode
Press the CLEAR button on the remote control to erase the last programmed track.
Using Digital Key Control
Digital Key Control allows you to change the musical key of disc music to fit any singer’s vocal range. The Digital Key Control buttons are located on the remote control and front panel
b - Lowers the musical key
(remote control only) - Resets the musical key back to the original or natural key
# - Raises the musical key
Setting Repeat Options
Press the REPEAT button on the remote control to cycle through the available Repeat options
•
•
•REPEAT OFF: All Repeat options are off
•CHAPTER REPEAT (DVD only): Repeats the current chapter on a DVD disc
•TITLE REPEAT (DVD only): Repeats the current title on a DVD disc
Switching Between PAL and NTSC Video Modes
The
1.If there is a disc in the
2.Press the P/N button on the remote control
3.Press ENTER on the remote control. The video mode will change
PAL: Europe and Asia
NTSC: North America
15