Changing the Locking Blocks

CV820WB Owner’s Manual

■CV820WB Control System

Bridge Pickup

Neck Pickup

	Pickup Selector
Neck Pickup Volume	Neck Pickup
Neck Pickup Volume
Bridge Pickup Volume	Mix
	Bridge Pickup

■About Wes Borland’s String Gauges

The CV820WB is the Wes Borland signature guitar model.The unique string gauges and tunings used by Wes Borland are given below.

Sting		Tuning	Gauge

	1st	C#	.011
	2nd	G#	.014
	3rd	E	.022 (Wound)
	4th	B	.032 (Wound)
	5th	F#	.042 (Wound)
	6th	C#	.052 (Wound)

The guitar is strung with .010–.046 gauge strings when shipped from the factory. In order to use the same gauge strings as Wes Borland you will need to change the locking blocks in the FC nut. The procedure given in the following section describes how to change the locking blocks.

1 Remove the old strings. (Refer to the “Removing the old strings”5 Set the locking bolt. section in the FC Tremolo System Manual.)

2 Loosen the FC nut locking lever, and remove the locking lever.

Loosen	6 Re-attach the locking lever and tighten lightly.

FC Nut Part Names

FC Nut

*1 : About locking blocks 1 and 2

FC Nut Components

Locking Block 1: for strings 1–3 (wider width) (x2) replacement blocks are included *1

Locking Block 3 (x1)

Locking Bolt (x1)

Locking Block 2: for strings 4–6 (narrower width) (x2) replacement blocks are included *1

Locking Lever x1

3 Remove the locking bolt.

Tighten

7 This completes locking block replacement. Install the new strings

and tune the guitar. (Refer to the “Installing the new strings” section

Included with the guitar is a set of locking blocks that fit the string gauges used by Wes

Borland. Please note that the width of each locking block is different.

	For Normal Gauge Strings	Supplied Replacement: For Wes Borland Gauge
	(.009–.042/.010–.046, etc.)	(.011–.052)
	Fingerboard side	Fingerboard side
	Head side	Head side
Locking Block 1
1st–3rd strings (wide)	6.8 mm wide	6.6 mm wide
	(0.268 inch)	(0.260 inch)
	Marked “1”	Unmarked
	Fingerboard side	Fingerboard side
	Head side	Head side
Locking Block 2
4th–6th strings (narrow)	6.2 mm wide	6.0 mm wide
	(0.244 inch)	(0.236 inch)
	Marked “2”	Unmarked

in the FC Tremolo System Manual.)

4 Replace the locking blocks 1 and 2.

*Set the wider blocks for the 1st–3rd strings.

*Set the narrower blocks to the 4th–6th strings.

*Store the set of locking blocks you removed from the guitar in a safe place for future use.

CV820WB specifications

The Yamaha CV820WB is an advanced console that provides an exceptional audio experience in a variety of applications, including live performances, studio recordings, and installations. Designed for professionals, it brings together innovative technology and outstanding sound quality to meet the demanding requirements of audio engineers and musicians alike.

One of the most notable features of the CV820WB is its operational versatility. The mixer comes with multiple input channels, allowing users to connect a wide range of audio sources, from microphones to instruments. Each channel is equipped with high-quality preamps that ensure clean, transparent sound with minimal noise, while also providing enough headroom to accommodate loud signals without distortion.

The integrated digital signal processing (DSP) capabilities in the CV820WB are impressive. It includes a variety of built-in effects such as reverb, delay, and compression, which can be easily tailored to enhance the overall sound. Users can also access multiple equalization options, enabling fine-tuning of audio outputs to suit various environments and requirements.

Another standout characteristic is the user-friendly interface of the CV820WB. The layout is designed for intuitive operation, featuring clearly labeled controls and effective visual feedback. This makes it easy for both seasoned professionals and beginners to operate the mixer efficiently, whether during complex live performances or straightforward recordings.

The CV820WB also emphasizes flexibility in connectivity. It supports various digital and analog connections, including USB interfaces for seamless integration with computers and other digital devices. This makes it a perfect choice for home studios and professional setups alike, allowing for a smooth workflow in recording and mixing projects.

Durability is a key aspect of the CV820WB’s design. Built with rugged materials, it is engineered to withstand the rigors of touring and frequent use. Its robust construction ensures that it can handle the challenges of live events while maintaining reliability and longevity.

Overall, the Yamaha CV820WB mixer combines sophisticated technologies, exceptional sound engineering, and user-friendly features in a durable package. Its versatility makes it an ideal choice for a broad range of audio applications, ensuring that professionals can achieve the best possible sound quality in any setting. Whether for live sound, studio production, or installation, the CV820WB stands out as a compelling solution for audio excellence.