Roland pt-2000 Adding Reverberation to the Sound Reverb Effect, Changing the Reverb Type

Playing the Keyboard

Adding Reverberation to the Sound — Reverb Effect

The pt-2000 allows you to add reverberation to what you play on the keyboard. With the reverb effect, you can get a pleasant reverberation, making it sound as if you were performing in a concert hall or similar space.

1. Press the [Reverb] button; the button indicator lights.

Reverberation is added to the sound.

fig.4-08.e

ReverbReverb

Press lit

2. Press the [Reverb] button once more; the button indicator goes off, and the reverb effect is no longer added to the sound.

fig.4-09.e

ReverbReverb

Press dark

Changing the Reverb Type

The pt-2000 features eight reverb types, 1-8, allowing you to select the preferred reverb sound.

The higher the reverb type number, the deeper the effect is. The reverb is reset to type 4 when the power is switched on.

To change the reverb type, hold down the [Key Touch/Demo Song] button and press one of the keys C3-G3 (corresponding to reverb types 1-8).

<Ex.> Selecting Reverb Type 6

While holding down the [Key Touch/Demo Song] button, press the F3 key (the fourth white key below Middle C).

Refer to “Functions Assigned to the Keyboard” (p. 23).

fig.4-11.e

Key Touch/

Demo Song

While holding down...

	2		4			7
1		3		5	6		8
C3					F3		G3

Press

14