AG-Stomp
1:SW Check
(1)Using the UP and DOWN switches, select “1”. (This step can be skipped if “1” is already selected.)
(2)Press the STORE switch.
(3)Starting with the UP switch, press each switch whose LED lights up one after another. After “MIC”, “BANK”, “3”, “2” and “1”, all LED segments should light up and then go out.
•A number (0 to 20) is indicated at the right end of the 7 segment LED.
•If “E” representing an error appears at the left end of the LED, press the UTILITY switch for resetting.
2:VR Check (Be sure to set each of VR, SW and EXP PEDAL to be checked at its center position.)
(1) Using the UP and DOWN switches, select “2”. (This step can be skipped if “2” is already selected.)
|
|
|
|
|
|
|
| !4 |
|
|
|
|
|
|
|
| FC7 Foot Controller |
| u | i | o | !0 | !1 | !2 | !3 |
|
p | q | w |
| e | r | t | y | Fig.2 |
(2) | Press the STORE switch to start checking. | |||
| LED display |
|
|
|
| 2. | 0 |
| |
|
|
| ||
|
|
|
| |
(3) | Turn MIC SW p counterclockwise. | |||
| LED display |
|
|
|
| 2 | 0. |
| |
|
|
| ||
|
|
| ||
(4) Turn MIC SW p clockwise. | ||||
| LED display |
|
|
|
| 2. | 1 |
| |
|
|
| ||
(5)Set MIC SW p at the center position.
(6)Turn BLEND STEREO q counterclockwise.
LED display | 2 | 1. |
|
(7) Turn BLEND STEREO q clockwise.
LED display | 2. | 2 |
|
(8)Set BLEND STEREO q at the center position.
(9)Check other VRs w to !2(Fig. 2) one after another until LEVEL !3finally.
LED display | 2.14 |
|
|
| |
(10)Return EXP. PEDAL.!4 | ||
LED display | 2 14. |
|
29