AG-Stomp
ERROR MESSAGES
If an error occurs during operation, one of the following error message numbers will appear in the display. Stop operation of the
E1: MIDI Receive Buffer Full
CAUSE: Too much MIDI data is being received and the buffer is full
SOLUTION: Try reducing the amount of data being sent, or break the data into smaller blocks.
E2: Communication Error.
CAUSE: An abnormality is detected during MIDI communications.
SOLUTION: Check all connections, etc. and try again.
E3: Bulk Receive Check Sum Error.
CAUSE: The check sum does not match the received MIDI bulk dump data.
SOLUTION: Check all connections and transmitted data, and try again.
E4: Bulk Receive Data Abnormality.
CAUSE: An abnormality is detected while receiving the bulk dump.
SOLUTION: Check all connections and transmitted data, and try again.
32