Memorex MKS8502 manual Using the BUILT-IN Camera, Hold Contrast Brightness

MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 14

OPERATION (CONTINUED)

USING THE BUILT-IN CAMERA

1

2

3

Rotate the MONITOR switch to the CAMERA position.

When connected to an external TV, slide the CDG/CAMERA switch to the CAMERA position to see the image from the camera on the external TV.

Open the camera compartment. The camera will then show the image on the built-in screen.

Rotate the Camera Focus Adjusting Ring located on the outside of the lens to adjust the camera’s focus.

NOTE: When the MONITOR switch is in the CAMERA position, you can still playback a CD.

ADJUSTING THE PICTURE

When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:

V-HOLD CONTRAST BRIGHTNESS

If the picture moves up and down or rolls, rotate to adjust the vertical hold.

If the picture is too strong or too weak, rotate to adjust the contrast and clearly define the shades of blacks, grays and whites.

If the picture is too light or too dark, rotate to adjust the brightness.

14