Configurations

FRONT PANEL:

USB
MIC1	MIC2	ECHO	MIC VOL

1.POWER - This button is used to turn the AVC7504 “ON” or “OFF”.

2.Direct Track Access - These buttons allow for Direct Track selection. For tracks 5 and up, press the 5+ buttons. For example, to go directly to track 7, you would press 5+ and 2, and to track number 19, press 5+ three times and then 4.

3.OPEN/CLOSE - This button is used to open or close the DISC TRAY.

4.R/L - This button will cycle between four audio playback modes: Stereo, Mono Left, Mono Right, and Mix-Mono. In the

Stereo mode, the audio playback is standard R/L audio. In the Mono Left mode, the right channel is removed and replaced with a duplicate left channel. In the Mono Right mode, the left channel is removed and replaced with a duplicate right channel. In the Mix-Mono mode, the left channel and the right channel are combined to both the right and left channels.

5.N/P - This button will cycle through six

TV system modes: NTSC, PAL, MULTI, NTSC (P-SCAN), PAL (P-SCAN), and MULTI (P-SCAN).

6. - This button is used to go back to the Previous track.

7. - This button is used to go to the Next track.

8. - Press this button once to Pause the disc playback. Press this button again to stop the disc playback.

9. - Press this button once to pause the disc playback. Press this button again to initiate the disc playback.

10.DISC TRAY

11.REMOTE CONTROL SENSOR

12.USB - This is a USB input. the USB input will be accessed only when there is no disc present in the disc tray and the disc tray is closed.

13.MIC1- This is microphone 1 input.

14.MIC2 - This is microphone 2 input.

15.ECHO - This is a Echo Volume control knob. Turn this knob clockwise to increase the echo volume or turn this knob counter-clockwise to decrease the echo volume.

16.MIC VOL - This is a microphone volume control knob for both the MIC1 and MIC2 inputs. Turn this knob clockwise to increase the microphone volume or turn this knob counter-clockwise to decrease the microphone volume.

17.LED Display