Audio2000's AVC7504 manual Eject This button is used to open

Configurations

REMOTE CONTROL:

ACC7504-1

	19.	EJECT - This button is used to open
		or close the DISC TRAY as indicated in numeral 10.
	20.	OSD - Cycles through the different On Screen Display
		options.
	21.	ANGLE - Cycles through the available viewing
19		angles on DVDs with multiple viewing angles available.
	22.	SUBTITLE - Cycles through the available subtitle
20
		languages on a DVD with subtitles available.

2123. MUTE - Mutes the sound from disc, ipod and AV input

22channels.

2324. LANGUAGE - This button swithches between the LANGUAGES

24in a DVD that contains multiple LANGUAGES.

2525. RESUME - Resumes playback from exact stop where

26a disc has been stopped in standby mode.

2726. EQ - Press this button to show the audio frequency spectrum. Press this button again to remove the spectrum.

27.SETUP - Use this button to access the AVC7504’s setup

page on the video screen. You can navigate between the General Setup Page, Audio Setup Page, Video Setup Page, preference page and the Password Setup page using the DIRECTIONAL buttons (< ^ > v) on your remote. Select options and make changes using the ENTER button on the

28remote.

28.ZOOM - Allows you to zoom in 2X, 3X and 4X and

29zoom out 1/2X, 1/3X and 1/4X on the video during disc playback.

3029.R/L - This button will cycle between four audio playback modes:

31Stereo, Mono Left, Mono Right, and Mix-Mono. In the Stereo mode,

32the audio playback is standard R/L audio. In the Mono Left mode, the right channel is removed and replaced with a duplicate left channel. In the Mono Right mode, the left channel is removed and replaced with a duplicate right channel. In the Mix-Mono mode, the left channel and the right channel are combined to both the right and left channels.

3330.STEP - Allows you to view a disc step-by-step, one

frame at a time. See the Operations section in this manual

34for detailed instructions on using the Step feature.

31.N/P - This button will cycle through six TV system modes: NTSC,

35PAL, MULTI, NTSC (P-SCAN), PAL (P-SCAN), and MULTI (P-SCAN).

32.SLOW - Cycles through the different slow motion options while in DISC mode.

33.GOTO - This button cycles through "Disc Go To: __:__", "Track

Go To:__:__", and "Select Track:__ /__".When the "Disc Go To:__:__" is displayed, press four digits to go to the selected disc playback location. When the "Track Go To:__:__" is displayed, press two digits to go to the selected track playback location. When the " Select Tract:__/__" is displayed, press four digits to go to the selected track.

34. - Skip tracks when in DISC mode:

prev jumps to the previous track and Next skips ahead to the next track.

35.KARAOKE -This button toggles the microphone input "ON" and " OFF". This function will not be reset by pressing the "Default" button.

8