TV
TV
VOLTAGE SELECTOR
What you will need[Fig. A] ●AC power cord (included)
Note: Before turning on the power, make sure the red voltage selector [Fig. A] is set to the proper voltage. It should be set to 115V for North America and 230V for most European countries. Make sure
you know the proper voltage for your region before turning on the AKJ780D. 1.Connect the AC end of the power cord into the
AC input on the rear panel of the AKJ780D. 2.Connect the other end to a surge-protector
or any available power outlet.
Connecting to a TV / Video Monitor with an RCA Input What you will need
●One RCA-style video cable (included)
●One or two TV's or video monitors each with an RCA video input (not included)
1.Connect one end of the RCA video cable to the yellow Video Out on the rear panel of the AKJ780D.
2.The AKJ780D has two RCA-type VIDEO OUTPUT jacks for connecting to TVs or monitor devices. Both VIDEO OUTPUTS can be connected simultaneously.
3.Connect the other end of the RCA video cable to the Video Input on a TV / video monitor
115
Connecting to the AC Outlet to power the AKJ780D
Basic Connections
Since the AKJ780D contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD card player, the AKJ780D can be used as a self-contained sound system. Furthermore, the AKJ780D contains various audio video outputs to allow the AKJ780D to be connected to multiple TV sets, external sound systems, and/or multiple sound effect devices. The following content demonstrates the procedures for connecting the AKJ780D to the AC outlet and other audio video devices.