DVD System Setup Menu
1. SPEAKER SETUP
Opens up the Speaker Setup page 1.1 DOWNMIX
GeneralAudioDolbyVideo Preference
LT/RT - Sound output is divided with the Left coming
out of the Left speaker and the Right coming out of the | Speaker Setup | ||
S p d i f S e t u p | |||
Right speaker. |
| ||
| CH EQ Setup | ||
STEREO - Sound output is in Stereo Mode. | |||
3D Process | |||
V SURR - Virtual Surround Sound | |||
| |||
5.1 CH - For 5.1 Channel surround sound |
| ||
1.2 FRONT SPEAKER |
|
| |
Set this based on the size of your front speaker |
| ||
1.3 CENTER SPEAKER |
|
| |
Set this based on the size of | your front speaker |
| |
| |||
OFF: If you do not have a center speaker |
| ||
1.4 REAR SPEAKER |
|
| |
Set this based on the size of | your rear speaker |
| |
OFF: If you do not have a rear speaker(s) 1.5 SUBWOOFER
ON: If you have a subwoofer
OFF: If you do not have a subwoofer
2.SPDIF SETUP
SPDIF OFF: No digital audio output
SPDIF/ RAW: Digital audio output in RAW format. Normally used for DTS and Dolby Digital 5.1 signals
SPDIF/ PCM: Digital audio output in PCM format. Normally used for audio CD signal
3.CH EQ SETUP
EQ Type Choose the EQ type that is most similar to the kind of music you are playing
4.3D PROCESS
4.1 PRO LOGIC II
Turn PRO LOGIC II surround sound on and off. When it is turned on, more options are available
4.2 REVERB MODE
Select a specific reverb sound or turn reverb off
Dolby Digital Setup
1. DUAL MONO
Note: Can also be changed using the L/R button on the remote control
●Stereo - Left and Right in true stereo
●L - Mono - Left channel only (no vocals) ●R- Mono - Right channel only (no music)
2. DYNAMIC
Sets the linear compression ratio to get different compression results.
Optional settings: Off, 1/4, 1/2, 3/4, Full.
General | Audio | Dolby | Video | Preference |
- - Dolby Digital Setup - -
Dual Mono | Stereo |
Dynamic | |
| |
| |
|
|
|
|