FEATURES
1.
2.Three Unbalanced 1/4" Microphone Inputs
3.Two Switchable RCA A/V Inputs
4.Three RCA Audio Outputs (MIC,REC,LINE)
5.Two RCA Video Inputs(VCD,DVD)
6.Two RCA Video Outputs
7.Stereo Effect Loop for External Sound Effect Units
8.Master Music Volume, Balance and Low/Mid/High Frequency Controls
9.Master Echo Volume , Low/High Frequency, Repeat and Delay Controls
10.Master Microphone Volume Control
11.Individual Microphone
12.Individual Microphone Volume ,Balance,Echo and Low/Mid/High Frequency Controls 13.Stereo/Mono Echo Selection Button
14.Volume Reset Selection Switch and Remote Key Control Input
15.Remote Control
16.AC 115V 60Hz/AC 230V 50Hz Compatible
HANDLING PRECAUTIONS
Do not install the unit in following places:
In a place which is exposed to direct sunlight or near a source of heat such as a radiator.
In a place where the heat cannot escape due to poor ventilation, or where it is very humid or dusty.
In an unstable place with excessive vibrations or sloping.
In a place which may be exposed to rain, such as near a window.
In a place which may be exposed to soot, vapor or heat, such as near a cooking stove.
BEFORE CONNECTIONS
Connection precautions | Power consumption of AC power outlets |
Be sure to switch off the powers of the related equipment before making any connection.
The "White" input/output jacks of the amplifier are designed for the Left channel, while the "Red' jacks are for the Right channel. Be sure to connect the cords without mistaking the correspondences of the Left and Right channels.
Insert the plugs of the connection cords securely into the jacks. If the connection is incomplete, sound may not be produced or noise may be generated.
When unplugging the power cord from the power outlet, be sure to grasp the plastic molding of the plug and pull.
Be careful that the total power consumption does not exceed the wattage marked on the rear panel. Do not connect other appliances than the system components to the power outlets of this unit.
Do not connect a TV set to this unit, even if the power consumption value marked on a TV set is below the permissible limit of this unit. A larger current than the permissible value may flow when the TV power is turned on.
3