Rear Panel

Descriptions and Functions

230

Serial Number

Made in P.R.C.

PRE-OUT

1.FUSE TERMINAL - This terminal houses the AKJ780E main system FUSE.

2.VOLTAGE SELECTOR - This selector toggles between 110-120V and 220-240V power settings. Please make sure this toggle is set to the correct position, matching the receiving AC outlet's power supply before plugging it in and operating it. Doing so may cause severe damage to the unit and void your product warranty.

3.MAIN POWER switch- This switch can be set to ON or OFF position as follows: ●ON - to turn on the AKJ780E power.

●OFF - to turn off the AKJ780E power.

Note: The red POWER /STANDBY button on the front panel will not turn the AKJ780E on if the MAIN POWER switch is switched OFF.

4.EFFECTS INSERT jacks - The effects inserts allow you to add external effects to the audio signal without compromising the original signal. Use the MIC IN/OUT when adding effects to the vocal signal ,use the KEYBOARD IN/OUT when adding effects to the Music and use the GUITAR IN/OUT when adding effects to the music.

5.5.1 CHANNEL AUDIO OUTPUT jacks-These jacks are used for connecting to 5.1 channel ready receivers/amplifiers. The label on each jack specifies which speaker in the surround sound system the output signal from the labeled jack is sent to: FL-front left, FR-front right, SL-surround left, SR-surround right, CEN-center, SW-subwoofer. The ML jack is the same as the FL jack and is used as the main left output

in a stereo system. The MR jack is the same as the FR jack and is used as the main right output in a stereo system.

6.COMPONENT VIDEO OUTPUT jacks - These jacks output VIDEO to a TV monitor via COMPONENT VIDEO cables. COMPONENT VIDEO outputs the different color signals (U/Pb and V/Pr) and luminance signal (Y) separately

for high-fidelity in reproducing colors. The description of the component video output connectors may differ depending on the TV set or monitor i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/B-Y/Y. Component video cables only transmit the video signal, separate cables are needed for audio signals. Please refer to the operating instructions of the TV set or monitor for details.

7.COAXIAL OUTPUT jack - This digital output is for connecting devices with a COAXIAL cable.

8.VIDEO (RCA) and S-VIDEO OUT jacks - These jacks output video to a display device (TV, TFT, etc.). The VIDEO jack outputs video using an RCA video cable. The S-VIDEO jack uses an S-VIDEO cable. S-VIDEO provides better color separation and better resolution by separating the color and picture signals of a composite-video signal.

9.OPTICAL OUTPUT jack - This digital out is for connecting devices with an OPTICAL cable. Please make sure to remove the protective cover from this jack prior to connecting an OPTICAL cable. When not using this input, keep the protective cover on to protect it from dust and foreign material.