CARE AND MAINTENANCE
POWER SWITCH
After using the
CLEANING THE UNIT
To clean the exterior of the unit, simply wipe with a soft clean cloth moistened with plain lukewarm water.
CLEANING TAPE HEAD
When the tape is running, magnetic tape residue, powder and dust naturally accumulate on the tape deck heads, capstan and pinch roller, when they become too dirty, you will find:
Sound quality deteriorates.
The output sound level drops.
The previous recording is not completely erased.
Recording is not performed satisfactorily.
T h e r e f o r e , f o r c o n t i n u e d h i g h performance from the cassette section, periodically clean the heads, pinch rollers and capstans whenever an accumulation of dust and
12
NOTE
Screwdrivers and other metal objects should never be allowed to come in contact with tape heads. These will scratch the sensitive surface causing damage to your tapes.
Magnets or magnetized objects should not be placed near tape heads.
To prevent fire or shock hazard, disconnect your stereo system from the AC power plug when cleaning.
COMPACT DISC
Handling Disc
Although the music tracks in the disc are covered with a protective layer, it is still advisable to treat the disc carefully. Ensure that you always pick up discs by the edge, and put them back in their holders immediately after use.
CLEANING DISC
Cleaning will not normally be necessary. However, should fingerprints, dust or dirt appear, you can wipe them off with a soft,
ENGLISH
5 4 3
Proprietary tape head cleaners are available from most
CASSETTE DECK CARE
Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzol, benzene or other strong chemical cleaners since these could damage the finish or your unit. It is important that no liquid reaches the inside of the unit.
N O T E : D o n o t u s e t h e d e t e r g e n t o r a b r a s i v e cleaning agents, for they can damage the disc.
CD PLAYER
The player mechanism is fitted with self- lubricating bearing and must not be oiled or greased.
E16