ENGLISH
ValveKing™ Royal 8 - Guitar Amplifier
Before you begin to play through your amplifier, it is very important to ensure the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered for easy reference.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
1HIGH GAIN INPUT
This input is used for most electric guitars. It is 10 dB louder than Low Gain input.
2LOW GAIN INPUT
This input is provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the High Gain input. If both inputs are used simultaneously, the levels are the same (both are Low Gain).
3GAIN
This knob controls the input volume level. Set this control to the maximum level of desired preamp distortion and use the volume control on your guitar to achieve cleaner tones.
4TONE
This knob is a passive tone control that regulates the amplifiers frequency response.
5MASTER
This knob controls the output volume level and the amount of available power amp distortion.
6HEADPHONE OUTPUT
This standard 1/4” output jack allows you to connect standard headphones to the ValveKing Royal 8. When headphones are connected to the ValveKing Royal 8‚ the speaker is automatically turned off.
7PILOT LIGHT
This pilot illuminates when AC power is being supplied to the amp.
8POWER SWITCH
To apply power to the unit, flip the switch to the “ON” position.
Specifications
Rated Power:
5 W(rms) into 8 Ω
Dimensions (H x W x D):
13.25" x 16.0" x 8.25"
33.6 cm x 40.6 cm x 21.0 cm
Weight: 21.1 lbs.
9.6 kg