Philips AC4074 manual Filter replacement lock

Page 17

English 17

-- Filter replacement light 1 flashes: filter 1 (the pre-filter) has to be cleaned. See chapter ‘Cleaning’ for further instructions.

-- Filter replacement light 2 flashes: filter 2 (the formaldehyde filter (supplied with AC4074) or multi-care filter (supplied with AC4072)) has to be replaced.

-- Filter replacement light 3/4 flashes: the activated carbon filter and the HEPA filter have to be replaced.

Note:The HEPA filter and the activated carbon filter have a similar lifetime. Therefore they have to be replaced at the same time.

Filter replacement lock

If you do not replace the filter in time, the appliance stops operating approx. 2 weeks after the filter replacement light started flashing.When the appliance is locked, it does not operate until you have replaced the full filter and pressed the reset button.

Note:When filter replacement lights 2 or 3/4 and REPLACE FILTER on the control panel are on continuously, the appliance is locked (see section ‘Filter maintenance’ in this chapter for more information).

How long it takes before the appliance is locked depends on the operating time and speed level selected after the filter replacement alert. Approximately 1 day before the appliance locks, it beeps every 30 minutes to inform you that one of the filters needs to be replaced.

When the appliance is locked, you hear a beep when you press any button. You can switch off the appliance by pressing and holding the on/off button. If the appliance is locked:

1Check which filter needs to be replaced (see section ‘Filter replacement alerts’).

2Switch off the appliance and unplug it.

3Replace the appropriate filter (see section ‘Replacing the filters’).

Image 17
Contents AC4074, AC4072 Page Page Page 简体中文 繁體中文Filtration in several stages EnglishEnglish Placing the filters Electromagnetic fields EMFEnglish Using the appliance Air quality indication Fan speed lights/filter replacement lightsAdjusting the air quality sensor sensitivity Sensitivity level Auto modeFan speed Night modeBody of the appliance Silent modePre-filter is washable Pre-filterAir quality sensor Filter maintenanceFilter replacement lights Filter replacement lock Replacing the filters Appliance Storage Problem Possible solution Appliance stops 多階段過濾 繁體中文重要事項 24 繁體中文放置濾網 電磁波 EMF26 繁體中文 風扇速度指示燈/更換濾網指示燈 空氣品質指示空氣品質 調整空氣品質感測器敏感度 28 繁體中文敏感度等級: 風扇速度指示燈 敏感度等級風扇速度 夜間模式產品機體 30 繁體中文靜音模式 前層濾網 保養濾網 32 繁體中文空氣品質感測器 更換濾網鎖 更換濾網指示燈更換濾網 34 繁體中文繁體中文 36 繁體中文 可能的解決方法 多重过滤 产品简介注意事项 安装过滤网 40 简体中文电磁场 EMF 使用本产品 空气质量 42 简体中文空气质量指示 调节空气质量传感器的灵敏度 风扇速度指示灯/过滤网更换指示灯灵敏度级别: 风扇速度指示灯 灵敏度级别自动模式 44 简体中文夜间模式 风扇速度预过滤网 静音模式产品机身 空气质量传感器 46 简体中文过滤网更换指示灯 维护过滤网过滤网更换锁定 48 简体中文更换过滤网 50 简体中文 过滤网 保修和服务 故障种类和处理方法可能的解决方法 52 简体中文2009/09/26 4222.002.7314.4
Related manuals
Manual 23 pages 37.38 Kb

AC4074 specifications

The Philips AC4074 is a cutting-edge air purifier designed to enhance indoor air quality in homes and offices. With its modern aesthetic and robust functionality, this device addresses common air pollutants, providing a healthier living environment.

One of the standout features of the Philips AC4074 is its advanced filtration system. It utilizes a multi-layered filter that includes a pre-filter, a HEPA filter, and activated carbon. The pre-filter effectively captures larger particles such as dust and hair, while the HEPA filter is capable of trapping 99.97% of particles as small as 0.3 microns. This includes harmful allergens like pollen, dust mites, and pet dander, making it ideal for allergy sufferers. The activated carbon layer works to eliminate odors and harmful gases, ensuring that the air is not only clean but also fresh.

The AC4074 incorporates Philips’ innovative VitaShield technology, which enhances its filtration capabilities. This technology senses the air quality in real-time, automatically adjusting the purification speed based on the level of pollutants detected. With its Smart Sensor, users can rest assured that the device will operate efficiently, providing purified air without any manual intervention.

In addition to its powerful purification features, the Philips AC4074 boasts a user-friendly interface. It features intuitive controls, allowing users to adjust settings with ease. The LED display provides real-time feedback on air quality, filter status, and operational mode.

Another notable characteristic of the AC4074 is its quiet operation. Designed for use in bedrooms and living spaces, the air purifier includes a sleep mode, which reduces noise levels for undisturbed rest. Its compact design allows it to fit seamlessly into any room, making it a practical choice for various living environments.

With energy efficiency in mind, the Philips AC4074 is also designed to operate without significantly increasing energy bills. The unit is compliant with various energy standards, ensuring that it provides environmental benefits without compromising on performance.

Overall, the Philips AC4074 represents a harmonious blend of technology, efficiency, and design, making it an excellent choice for anyone looking to improve their indoor air quality. With its powerful filtration system, smart sensing capabilities, user-friendly controls, and quiet operation, it stands out as a reliable air purifier that meets the needs of modern living.