Peavey XR 8300 EFX Time, EFX to Monitor, EFX to Main, FLS Feedback Locating System, Graphic EQ

Front Panel

19EFX TIME

This control adjusts the time of the particular reverb or delay.

20EFX TO MONITOR

This control adjusts the amount of effects signal sent to the monitor mix, allowing effects to be heard from the stage via the monitors. Keep this control as low as possible.

21EFX TO MAIN

This control adjusts the amount of effects sent to the main front-of house mix. Remember: A little goes a long way!

22

23

22FLS® FEEDBACK LOCATING SYSTEM

When feedback occurs‚ the corresponding LED of the frequency band that is feeding back will illumi- nate over the slider to be adjusted. Slowly bring the corresponding slider down until the feedback is gone. The LED will remain illuminated for a few seconds after the feedback is gone. When the feedback doesn’t return‚ all the LEDs will become active again, acting as a normal EQ.

23GRAPHIC EQ

These 7-band EQs are designed for 12 dB of cut or boost. The equalizers are placed before the Preamp outputs; therefore‚ the Main and monitor preamp outputs are post-EQ.

11