Philips AC4083 manual 66 简体中文

Page 66

66简体中文

1拧开水桶的顶盖。

2向水桶注入 1/3 水位的水。

3 向水桶里的水中添加一些温和的洗涤剂。

4将顶盖拧回到水桶上并拧紧(咔哒一声)。

5用双手来回晃动水桶以清洁水桶内侧。

6 拧开水桶的顶盖。

7 将水桶中的水全部倒入水槽。

8 用清水反复清洗水桶的内侧。

9将顶盖拧回到水桶上并拧紧(咔哒一声)。

水箱

每天清洗水箱和水箱盖,使其保持清洁卫生。

1

1 从产品中提起水桶 (1)。然后从产品背面卸下水箱 (2)

 

 

注意: 必须先取出水桶,然后才能卸下水箱。

2从水箱中取出加湿滤网。

2

3

打开 4 个固定夹,然后卸下水箱盖。

4取出软水器。

5在水龙头下清洗水箱和盖子。

注意: 如有必要,可使用温和的清洁剂来清洁水箱。在此情况下, 请彻底清洁水箱。

6 使用柔软的干布擦干水箱和盖子。

Image 66
Contents Clean air system AC4083 Page OAA Page 繁體中文 简体中文Introduction Filtration in several stagesGeneral description English English Electromagnetic fields EMF Before first usePlacing the filters English Preparing for humidification Remove it from the applianceLift the water bucket out of the appliance 1.Then remove English Inserting the battery in the remote control The right 2 to lock itUsing the appliance Switching the appliance on and offRemote control Setting the fan speed Silent modeBoost Power mode Auto modeNight mode Timer function Air quality sensor and air quality indicationAdjusting the air quality sensor sensitivity Sensitivity levelWater level Setting the desired air humidityAir purification combined with air humidification Humidity indicationAir quality sensor and air humidity sensor Cleaning and maintenanceBody of the appliance Water bucketHygienically clean Water tankCleaning the pre-filter Cleaning the humidification filterCleaning schedule Let excess water drip off the humidification filterFilter replacement indication Filter 2 Multi-care filter Filter replacement and reset procedureFilter maintenance Filters 3/4Activated carbon filter and Hepa filterReplacing the filters and resetting the appliance AccessoriesEnvironment Guarantee and service Troubleshooting Problem Possible solutionDon’t see the current humidity indication change 繁體中文 多階段過濾30 繁體中文 Speed 速度調節 按鈕附有速度指示燈及濾網清理與更換濾 網指示電磁波 EMF 32 繁體中文 放置濾網保濕前準備 34 繁體中文 繁體中文 36 繁體中文 將電池裝入遙控器開啟及關閉本產品 遙控器請選擇僅限淨化空氣或是淨化空氣結合空氣保濕 38 繁體中文 設定風扇速度Silent 靜音 模式 Boost Power 超高速 模式 Auto 自動 模式夜間模式 空氣品質感測器及空氣品質指示 40 繁體中文定時功能 空氣品質指示燈的顏色風扇速度指示燈 敏感度等級 調整空氣品質感測器敏感度敏感度等級: 淨化空氣結合空氣保濕42 繁體中文 設定理想的濕度濕度指示 產品機體 空氣品質感測器及溼度感濕器44 繁體中文 清潔前層濾網 前層濾網及保濕濾網濾網 1 前層濾網 及濾網 5 保濕濾網 清潔指示 清濕保溼濾網清潔方式 46 繁體中文清潔時程 保養濾網濾網 5/6:保濕濾網及軟水器 更換濾網指示 濾網 2:全效濾網濾網 3/4:活性碳濾網及 Hepa 濾網 更換濾網與重設產品48 繁體中文 環境保護故障排除 可能的解決方法50 繁體中文 产品简介 多重过滤注意事项 52 简体中文电磁场 EMF 54 简体中文 安装过滤网加湿准备 56 简体中文 简体中文 58 简体中文 将电池装入遥控器打开或关闭产品 遥控器选择仅空气净化或空气净化加空气加湿 60 简体中文 设置风扇速度SILENT(静音)模式 Boost POWER(最高风速)模式 AUTO(自动)模式夜间模式 空气质量传感器和空气质量指示 62 简体中文计时器功能 空气质量指示灯的颜色风扇速度指示灯 灵敏度级别 调节空气质量传感器的灵敏度灵敏度级别: 空气净化加空气加湿64 简体中文 设置所需的空气湿度湿度指示 产品机身 空气质量传感器和空气湿度传感器66 简体中文 清洁预过滤网 预过滤网和加湿滤网过滤网 1(预过滤网)和过滤网 5(加湿滤网)清洁指示 清洁加湿滤网清洁方法 68 简体中文清洁计划 维护过滤网过滤网 5/6:加湿滤网和软水器 过滤网更换指示 过滤网 2:多功能过滤网过滤网 3/4:活性炭过滤网 Hepa 过滤网 更换过滤网和重置产品70 简体中文 过滤器故障种类和处理方法 可能的解决方法72 简体中文 问题可能的解决方法Page 4222.002.7431.2

AC4083 specifications

The Philips AC4083 air purifier is a sophisticated device designed to enhance indoor air quality by efficiently filtering out pollutants and allergens. This appliance is especially beneficial for those living in urban areas, where air quality can often suffer due to pollution, dust, and other harmful particles.

One of the main features of the Philips AC4083 is its powerful filtration system. It utilizes a multi-layer filtration technology that includes a pre-filter, activated carbon filter, and a HEPA filter. The pre-filter captures larger particles like dust and hair, while the activated carbon filter effectively absorbs gases and odors from the air. The HEPA filter is designed to capture 99.97% of particles as small as 0.3 microns, including pollen, pet dander, and smoke, making it an excellent choice for allergy sufferers.

Another notable characteristic of the AC4083 is its Philips VitaShield technology. This innovative feature enables the purifier to automatically sense and adapt to changes in air quality. The device is equipped with a real-time air quality indicator that displays the current status of the air in your home, allowing users to monitor the effectiveness of the purification process.

The AC4083 operates quietly, making it suitable for use in bedrooms or other quiet environments. Its noise levels are optimized to ensure that it does not disturb sleep or daily activities. Additionally, the air purifier has a compact and modern design, allowing it to blend seamlessly into various home décors.

Ease of use is another advantage of the Philips AC4083. It features intuitive controls and multiple fan speed settings, including a turbo mode for quick purification. The filter replacement indicator reminds users when it’s time to change filters, ensuring that the device maintains its optimal performance.

Moreover, the energy-efficient design of the AC4083 means that it consumes less power, making it an eco-friendly choice for consumers. With its combination of advanced filtration technology, user-friendly features, and stylish design, the Philips AC4083 air purifier is an effective solution for maintaining a healthier indoor environment. Whether for allergy relief or general air quality improvement, this device stands out in the market for its reliability and efficiency.