Electromagnetic fields EMF, Before first use

English 9

-- To prevent interference, place the appliance at least 2m away from electrical appliances that use airborne radio waves such as TVs, radios and radio-controlled clocks.

-- When the air cleaner is not used for a long time, bacteria may grow on the filters. Check the filters after a long period of disuse. If the filters are very dirty, replace them (see chapter ‘Filter replacement and reset procedure’).

-- The appliance is only intended for household use under normal operating conditions.

-- Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet or kitchen.

-- The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

-- Keep the remote control out of direct sunlight. Do not place it near flames or in a damp environment.

-- Clean the water bucket and water tank every day to keep them clean. -- Only fill the water bucket with cold tap water. Do not use ground

water or hot water.

-- Do not put any substance other than water in the water bucket and in the water tank. Do not put fragrance in the water bucket and in the water tank.

-- If you do not use the humidification function for a long time, clean the water bucket and water tank, dry the humidification filter and store away the water softener.

-- If you need to move the appliance, disconnect the appliance from the mains first.Then empty the water bucket and the water tank. Carry the appliance horizontally by both handgrips on the sides of the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

Before first use

Placing the filters

The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance. Remove all filters, unpack them and place them back into the appliance as described below.

Tip: Place the appliance against a wall for more stability when you remove or insert filters.

Note: Make sure you insert the filters in the correct position.

AC4083 specifications

The Philips AC4083 air purifier is a sophisticated device designed to enhance indoor air quality by efficiently filtering out pollutants and allergens. This appliance is especially beneficial for those living in urban areas, where air quality can often suffer due to pollution, dust, and other harmful particles.

One of the main features of the Philips AC4083 is its powerful filtration system. It utilizes a multi-layer filtration technology that includes a pre-filter, activated carbon filter, and a HEPA filter. The pre-filter captures larger particles like dust and hair, while the activated carbon filter effectively absorbs gases and odors from the air. The HEPA filter is designed to capture 99.97% of particles as small as 0.3 microns, including pollen, pet dander, and smoke, making it an excellent choice for allergy sufferers.

Another notable characteristic of the AC4083 is its Philips VitaShield technology. This innovative feature enables the purifier to automatically sense and adapt to changes in air quality. The device is equipped with a real-time air quality indicator that displays the current status of the air in your home, allowing users to monitor the effectiveness of the purification process.

The AC4083 operates quietly, making it suitable for use in bedrooms or other quiet environments. Its noise levels are optimized to ensure that it does not disturb sleep or daily activities. Additionally, the air purifier has a compact and modern design, allowing it to blend seamlessly into various home décors.

Ease of use is another advantage of the Philips AC4083. It features intuitive controls and multiple fan speed settings, including a turbo mode for quick purification. The filter replacement indicator reminds users when it’s time to change filters, ensuring that the device maintains its optimal performance.

Moreover, the energy-efficient design of the AC4083 means that it consumes less power, making it an eco-friendly choice for consumers. With its combination of advanced filtration technology, user-friendly features, and stylish design, the Philips AC4083 air purifier is an effective solution for maintaining a healthier indoor environment. Whether for allergy relief or general air quality improvement, this device stands out in the market for its reliability and efficiency.