Philips AC4002 manual Filter replacement lock, Replacing the filters and resetting the appliance

Page 18

18English

-- Filter replacement light 3/4 and the ‘REPLACE FILTER’ light flash: filter 3 (activated carbon filter) and filter 4 (HEPA filter) have to be replaced.

Note: Filter 3 (activated carbon filter) and filter 4 (HEPA filter) have a similar lifetime.Therefore they have to be replaced at the same time.

2

1

Filter replacement lock

If you do not replace a filter in time, the appliance stops operating approx. 2 weeks after the filter replacement light started flashing. When the appliance is locked, it does not operate until you have replaced the full filter

and pressed the reset button.

Note:The time between the filter replacement signal and the locking of the appliance varies, depending on how often you use the appliance.

Note:When the power on/off light, filter replacement light 2 or 3/4 and the ‘REPLACE FILTER’ light are on continuously, the appliance is locked (see section ‘Filter maintenance’ in this chapter for more information).

Approximately 1 day before the appliance locks, it beeps every 30 minutes

to inform you that one of the filters needs to be replaced.

When the appliance is locked, you hear a beep when you press any button.

You can switch off the appliance by pressing and holding the on/off button.

If the appliance is locked:

1Check which filter needs to be replaced (see section ‘Filter cleaning light and filter replacement lights’ above).

2Switch off the appliance and unplug it.

3Replace the appropriate filter (see section ‘Replacing the filters and resetting the appliance’ below).

Replacing the filters and resetting the appliance

Tip: Place the appliance against a wall for more stability when you remove or insert filters. 

1Switch off the appliance and unplug it.

2Place your fingers in the recesses of the side panels and gently pull the bottom part of the front panel towards you.Then lift the hooks at the top of the panel out of the top of the appliance.

Image 18
Contents AC4004, AC4002 Page 7 89 Page 繁體中文 简体中文Introduction Filtration in several stagesGeneral description English Electromagnetic fields EMF Before first usePlacing the filters English Using the appliance Auto mode AC4004AIR Quality lightsAC4002AIR Quality lights Timer function Fan speedSleep mode Adjusting the air quality sensor sensitivity Cleaning and maintenance Sensitivity level Body of the appliance Pre-filterAir quality sensor Filter replacement Filter maintenanceFilter cleaning light and filter replacement lights Filter replacement lock Replacing the filters and resetting the applianceEnglish Appliance first 1.Then push the panel against the body Accessories AC4002 only adding the multi-care filterGuarantee and service EnvironmentTroubleshooting Problem Possible solutionAppliance is extra 繁體中文 多階段過濾26 繁體中文 重要事項電磁波 EMF 放置濾網28 繁體中文 AC4004:空氣品質 AIR Quality 指示燈 AC4002:空氣品質 AIR Quality 指示燈風扇速度 30 繁體中文自動模式 定時功能休眠模式 32 繁體中文 調整空氣品質感測器敏感度敏感度等級: 產品機體 前層濾網34 繁體中文 空氣品質感測器保養濾網 濾網清理指示燈與更換濾網指示燈36 繁體中文 更換濾網鎖更換濾網與重設產品 繁體中文 38 繁體中文 僅限 AC4002:使用多重防護濾網 保證書與服務 故障排除40 繁體中文 可能的解決方法产品简介 一般说明 图 1多重过滤 注意事项 42 简体中文初次使用之前 电磁场 EMF安装过滤网 44 简体中文 使用本产品 AC4004:AIR Quality 空气质量指示灯AC4002:AIR Quality 空气质量指示灯 风扇速度 46 简体中文自动模式 计时器功能休眠模式 调节空气质量传感器的灵敏度 清洁和保养 48 简体中文 灵敏度级别:产品机身 预过滤网50 简体中文 空气质量传感更换过滤网 维护过滤网过滤网清洁指示灯和过滤网更换指示灯 52 简体中文 过滤网更换锁定更换过滤网和重置产品 简体中文 54 简体中文 仅限于 AC4002:添加多重防护过滤网 保修和服务 故障种类和处理方法 56 简体中文2009/06/11 4222.002.7312.1
Related manuals
Manual 21 pages 17.94 Kb

AC4002 specifications

The Philips AC4002 and AC4004 air purifiers are designed to enhance indoor air quality, catering to a range of environments, including homes and offices. Both models are equipped with advanced technologies that ensure effective air purification, making them ideal for individuals concerned about allergens, pollutants, and overall air hygiene.

The Philips AC4002 features a 3-layer filtration system, combining a pre-filter, a HEPA filter, and an activated carbon filter. This multi-layer approach is engineered to capture up to 99.97% of airborne particles as small as 0.3 microns, which includes common allergens like dust mites, pollen, and pet dander. The activated carbon filter excels in reducing odors and harmful volatile organic compounds (VOCs), ensuring that the air remains fresh and pleasant.

Similarly, the AC4004 also incorporates a robust filtration mechanism. Furthermore, the AC4004 model is equipped with additional smart features, such as improved air quality sensors. These sensors continuously monitor the air quality and automatically adjust the fan speed according to the detected level of pollutants. This not only ensures efficient purification but also optimizes energy consumption, making the device eco-friendly.

Both models boast a sleek, modern design that seamlessly fits into various room styles. Their compact size allows for versatile placement, whether on a table, shelf, or floor. The intuitive user interface is designed for convenience, featuring easily accessible controls and a digital display that provides real-time information on air quality status.

Moreover, the noise levels of the Philips AC4002 and AC4004 are impressively low, meaning they can operate quietly in bedrooms or living spaces without causing disruptions. This is particularly important for users who prioritize peaceful environments for sleep or work.

In addition to their main features, the longevity is enhanced by filter replacement indicators, which alert users when it’s time to change the filters, ensuring optimal performance. With their combination of high-efficiency filtration, smart air quality monitoring, and user-friendly design, the Philips AC4002 and AC4004 air purifiers stand out as reliable options for anyone seeking to improve their indoor air quality.