Peavey KB2/KB3 owner manual Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11.Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:

a)The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.

b)The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.

c)The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

12. Only use attachments/accessories provided by the manufacturer.

13. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16.Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

17.If this product is to be mounted in an equipment rack, rear support should be provided.

18.Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 12

102

1

105

12

110

14 or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

SAVE THESE INSTRUCTIONS!



Image 3
Contents KB2/KB3Keyboard Amplifier Owner Manual Page Important Safety Instructions Quick SET-UP Guide FeaturesHeadphone Level KB3 only Power SwitchLevel CH4/MONITOR LevelCH4/MONITOR Input Jack Main Line OUTSEND/RETURN Jacks Mains 10 Headphone JackKB2/3 Block Diagram Channel 3 Input Power Amplifier SectionPower Consumption Channel 1 & 2 InputsCaracteristicas Guía DE Instalación RápidaEQ Grave NivelConectador DE Monitor DEL Canal Línea DE Salida Principal10 Y 11 Conectadores DE ENVÍO/RETORNO Principales Conectador DE AuricularesSpezifikationen SETUP-KURZANLEITUNG Keyboard-VerstärkerMerkmale POWER-SCHALTER Headphone Level 6 NUR KB3Master Level 7 NUR KB3 IEC-STECKER/ABZIEHBARES Netzkabel UND 11 SEND/RETURN Jacks Mains13 CH4/MONITOR Input Jack External Speaker Jack 16 NUR KB3KB3 Installation Rapide Amplificateurs pour ClaviersCaractéristiques 8POWER Switch Headphone Level 6 KB3 SeulementMaster Level 7 KB3 Seulement 10 & 11 SEND/RETURN Jacks Mains Channels 3‚ 2External Speaker Jack 16 KB3 Seulement Especificciones Page Page What This Warranty Covers Peavey Electronics Corporation Limited Warranty80305062

KB2/KB3 specifications

The Peavey KB2 and KB3 are renowned keyboard amplifiers designed for musicians seeking high-quality sound and versatility. These amplifiers have become staples for keyboard players, allowing them to amplify their instruments effectively while maintaining audio clarity.

The KB2 features a 40-watt power output, making it suitable for small to medium venues. It includes a single 12-inch speaker and a high-frequency driver, providing a well-rounded sound with a broad frequency response. The amplifier's 3-channel mixer allows for multiple instrument connections, including keyboards, microphones, and other line-level devices. This feature is particularly advantageous for live performances, enabling musicians to blend different sound sources seamlessly.

In contrast, the KB3 takes the capabilities a step further with an impressive 65-watt power output. It also incorporates a 12-inch speaker and a high-frequency driver, ensuring that sound projection remains clear, even at higher volumes. One of the standout features of the KB3 is its built-in reverb, offering musicians the ability to add depth and ambiance to their sound without needing external effects processors. Additionally, the KB3's 4-channel mixer provides greater connectivity options, accommodating a wider range of instruments and effects.

Both models boast Peavey’s patented "Sure Grip" handles, which make transportation easy. They are built to be durable, ensuring that they can withstand the rigors of frequent use, whether at gigs or rehearsals. The contoured cabinet design contributes not only to aesthetic appeal but also to the sound dispersion, allowing the sound to spread evenly throughout a space.

In terms of connectivity, both amplifiers include auxiliary inputs for connecting devices like MP3 players, enabling musicians to play along with backing tracks. They also feature a headphone output for silent practice, catering to different environments and situations.

Overall, the Peavey KB2 and KB3 deliver professional-grade performance with user-friendly features, making them popular choices for keyboardists of all levels. Their construction quality, sound fidelity, and versatility solidify their reputation in the music industry, ensuring that they remain a reliable option for live performances and practice sessions alike.