DeltaBass, Removable AC Power Cord | Peavey Deltabass specs

ENGLISH

DeltaBass™

Professional Bass Amplifier

Congratulations on your purchase of the Peavey DeltaBass™. The DeltaBass was designed keeping in mind the value of a lightweight, powerful bass amp. This amp has that and more.

Because the DeltaBass is a lightweight amp, it’s portable enough for any gig or practice. The easy- to-use three-band EQ is so versatile you should have no problem quickly dialing up your sound. Professional features like a Tuner Send, Post-EQ Effects Loop, and a transformer balanced XLR jack with Pre/Post EQ switch will make your next gig a breeze. Notice that we tapped the signal for the XLR before the Volume control (even for the Post EQ Send) so you can adjust your stage volume without tampering with the sound in the mains. This will certainly score some valuable points with your soundman.

To get the most out of your new DeltaBass, we suggest that you read this entire manual. Pay special attention to any warnings/cautions to ensure your safety and the safety of your product. Thank you for buying Peavey!

FEATURES:

•Buffered tuner send jack

•Post EQ effects loop

•Transformer-balanced XLR jack

•Pre/Post EQ send switch for XLR jack

•Ground lift switch for XLR jack

•Patented DDT™ power amp compression with defeat switch and LED indicator

•160 Watts (4 ohm) power amp

REAR PANEL:

1 3

REAR PANEL FEATURES

(1)REMOVABLE AC POWER CORD

This receptacle is for the IEC line cord (included), which provides AC power to the unit. Connect the line cord to this connector and to a properly grounded AC supply. Damage to the equipment may occur if an improper line voltage is used. (See voltage marking on unit.) Never remove or cut the ground pin of the line cord plug. This unit is supplied with a properly rated line cord. When lost or damaged, replace this cord with one of the proper ratings.