Peavey Deltabass manual Effects Return Jack, DDT Compression Defeat Switch, Status/Power Led

Page 6

(20)EFFECTS RETURN JACK

Use this mono 1/4" input for returning signals from external low-level effects or signal processing equipment.

(21)DDTCOMPRESSION DEFEAT SWITCH

DDTcompression is defeated when the button is in the “in” position. DDT should be enabled at all times to protect the speakers.

(22)STATUS/POWER LED

This LED serves two functions on the DeltaBass amp. The LED is green when the power switch is in the “on” position and power has been supplied to the DeltaBass. During normal operation, the LED also acts as a DDT indicator. The LED illuminates red when DDT power amp compression is taking place. When DDTis defeated, the LED will illuminate red when clipping occurs.

6

Image 6
Contents L ta B a s s Page Removable AC Power Cord DeltaBassSpeaker Jacks Power SwitchInput PAD Switch Input Jack17 PRE/POST EQ Select Switch Bright SwitchVolume Control Ground Lift SwitchDDT Compression Defeat Switch STATUS/POWER LEDEffects Return Jack DeltaBass Specifications Power Amplifier SectionPreamplifier Section DeltaBass Recommended Settings Slap SettingPage Peavey Electronics Corporation Limited Warranty Important Safety Instructions 80304642