Digital Effects Section
1
2
3
4
5
6
7
1CHANNEL SWITCH
Switches between the Channel I and Channel II effects presets. This feature is footswitchable using the optional Ecoustic Series Foot Controller. This button also switches between the Channel I and II preamps in Channel Switch mode.
2PARAMETER EDIT MODE SWITCH
Toggles between Normal mode and Parameter Edit mode. When in Normal mode, the encoders (5, 6, 7) are the level controls for the effects, and the labels "chorus", "delay" and "reverb" are lit. When in Parameter Edit mode, the encoders' LEDs change to reflect the current settings of the parameters, and serve to adjust the parameters as you turn them, and "rate", "feedback" and "decay" are lit. Pressing this switch again returns the effects section back to normal mode.
3TAP TEMPO CONTROL
Tapping this switch sets the delay time. The delay time is set to the tempo you tap on this button.
4BYPASS SWITCH
Pressing this switch bypasses the digital effects.
5CHORUS ENCODER
In normal operation mode, this controls the level of the Chorus. You will notice that the "chorus" label is lit in normal mode. In Parameter Edit mode, this controls the rate of the chorus effect and you will notice that the "rate" label is lit.
6DELAY ENCODER
In normal operation mode, this controls the level of the delay. You will notice that the "delay" label is lit in normal mode. In Parameter Edit mode, this controls the feedback of the delay effect and you will notice that the "feedback" label is lit.
7REVERB ENCODER
In normal operation, this controls the level of the reverb. You will notice that the "reverb" label is lit in normal mode. In Parameter Edit mode, this controls the decay of the reverb effect and you will notice that the "de- cay" label is lit.
21