Philips 52PFL7803D, 42PFL7803D user manual 1.1Safety

Page 5
1.Important

1.Important

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Read this user manual before you start to use this product.

In particular, pay close attention to this section and follow the safety and screen care instructions.The product warranty does not apply if damage is caused by failing to follow these instructions.

1.1Safety

Two people are required to lift and carry a TV that weighs more than 25 kilos (55lb). Improper handling of the TV can result in serious injury.

To avoid short circuit, do not expose the TV, remote control or remote control batteries to rain or water.

To avoid risk of fire or electric shock, do not place the TV, remote control or remote control batteries near naked flame sources (for example, lighted candles) and other heat sources including direct sunlight.

Do not touch any part of the TV, power connector or antenna cable during lightning storms.

Do not install the TV in a confined space such as a bookcase. Leave a space of at least 10cm (four inches) around the TV for ventilation. Be sure air flow is not obstructed.

If mounting the TV on a flat surface, be sure to use only the supplied stand and to mount the TV on a level, solid surface. Do not move the TV if the stand is not properly screwed to the TV.

Wall mounting of the TV should only be performed by qualified personnel.The TV must only be mounted on an appropriate wall bracket and on a wall that can safely hold the weight of the TV. Improper wall mounting can result in severe injury or damage. Do not attempt to wall mount the TV yourself.

If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections and cause arcing or fire.

Do not place the TV on the cord or anything else that can pinch the cord or loosen the mains plug. An improperly connected mains plug or damaged mains cord can cause arcing, fire or electric shock.

Be sure that you have full access to the mains cord for easy disconnection of the TV from the mains.

When disconnecting the TV from the mains, be sure to:

Turn off the TV, then the mains power (if available).

Unplug the mains cord from the mains socket outlet.

Unplug the mains cord from the power connector at the back of the TV. Always pull the mains cord by the plug. Do not pull the mains cord.

EN-5

Image 5
Contents 42PFL7803D 52PFL7803D Flat TVPage in this manual shall void the warranty WarrantyPixel characteristics Compliance with EMF3.Overview of remote control keys and Contents2.Overview of television controls and 4. Use your TV in digital mode1.1Safety 1.2Screen care 1.3Environmental care2.2Side connectors 2.Overview of television controls and connectors2.3Rear connectors 1.VOLUME +2.4Position the TV 2.5Install the remote control batteries2.6Use the Source List Source ListBWARNING 2.7Wall-mountthe TVUse VESA-compatiblebracket DNoteTV screen BWARNINGVESA-compatiblewall Bolt and spacer type1.POWER 3.Overview of remote control keys and functions2.SOURCE 3.SMART MODE17.INCR. SURR 15.SAP18.CHANNEL LIST 20.OKSetup your language and services 4.2Switch on the TV for the first time4.Use your TV in digital mode 4.1Get Started4.3Understand the information banner 4.4Install channels3.Channel number In the format 4.Channel name 5.Program titleReinstall all channels 3.Select Installation Service Setup and press ÆChannels Add new channels to your listChange the order of stored channels Install digital channels manuallySet your language 4.5Set your preferences3.Select Preferences Language and press Æ Menu options for languageSettings restored to default 4.6Restoring to default settingsDigital Audio Output Set your menu transparencyPin Code Reset to “1234” 4.7Control access to digital channels3.Select Access Restrictions and press Reset your PIN codeRestrict access to TV channels Restrict access to programs with Maturity ratingRestrict access to TV programs with Block Content Add all services to the favorite list 4.8Setup your favorite channelsChange the Favorite List name Select the TV channelsRemove all services to the favorite list 4.9Update your TVInstalling new software Viewing the current software version4.10 Get program listings 5.1Select your location 5.Use your TV in analog mode6.1Automatically install channels 6.Install channels6.2Manually install channels 3.Select Install Auto Program and press OK6.3Manage channels 3.Select Install Manual Name, and press OKTV Systems Fine tune your channelsStore your favorite channels 3.Select Install Fav. Program and press OKAdjust your picture settings 7.1Adjust TV settingsPicture settings Adjust your sound settingsPicture Formats Sound settings7.2Change your picture format Personal 7.3Use Smart Mode settingsSmart Mode settings Remove channels from Surf list 7.4Use the Surf featureAdd channels to your Surf list Active Control settings 8.1Use the Advance Picture features8.Use more of your TV Use Contrast +Set the sleep timer 8.2Use the Timer3.Sselect Features Timer Sleep, and press OK 3.Select Features Timer Time, and press OKEnable Child Lock Activate settings3.Select Features Child Lock and press OK 8.3Child-lockthe TVDisable Child Lock 8.4Control access to TV channelsAccess Parental Lock 3.Select Features Parental Lock and press OKParental Lock Change Access CodeLock channels Lock all channelsMovie Rating 8.5Control access to TV programsUse the TV Rating lock For certain regions only 8.6Turn on closed captions 3.Select Features Closed Caption and press OKUnblock programs Block other programs8.7Use the Demo modes 3.Select Features Demo and press OK8.8Use Ambilight Closed Caption choicesTurn on Ambilight Adjust brightness3.Select Ambilight On Turn off AmbilightUse Custom color Select Ambilight colorAmbilight Custom colors Set Ambilight balance9.Use your TV as a computer monitor 9.1Picture settings VGA mode9.2Feature settings VGA mode Features menu 10.2Control the TV settings in HD mode10.Use your TV in High Definition mode 10.1Connect the HD equipment10.5 Use Philips EasyLink 10.4 Use Native 1080 modeOne-touchplay One-touchStandbySymptoms 11. TroubleshootingEN-46 Possible causeEN-47 DIMENSIONS 12. SpecificationsPICTURE ENHANCEMENT EASE OF USE13.1 Connection overview 13. Connect devices13.2 Select connection quality 1.Antenna inputComponent YPbPr - Higher quality HDMI - Highest qualityS-Video- Good quality Component video cable - Red, Green, BlueComposite - Basic quality