Peavey 112 manual Series Specifications

Page 13

Series Specifications

Envoy® 110

Power Amplifier Section: Power @ Clipping (Typically):

(1 kHz, 120 VAC line)

40 W RMS into 6 Ω

Frequency Response:

+0, -2 dB 100 Hz to 20 kHz @ 35 W RMS into 6 Ω

Hum and Noise:

Greater than 86 dB below rated power

Power Consumption:

(Domestic)

75 W @ 60 Hz, 120 VAC

(Export)

75 W @ 50/60 Hz, 220-240 VAC

Preamp Section:

The following spec are measured @ 1 kHz with the controls preset as follows:

Clean Mode Switch, Classic

Lead Mode Switch, Classic Low and High @ 10

Mid @ 0

Lead Pre and Post Gain @10

Lead Mode Switch, Vintage Reverb @ 0

Nominal Levels are with Clean Volume @ 5

Minimum Levels are with Clean Volume @ 10

Headphone Output:

Load Impedance: 16 Ω or greater 0.3 W RMS

System Hum & Noise @ Nominal Input Level:

(20 Hz to 20 kHz unweighted) Greater than 78 dB below rated power

Speaker Simulated Direct Output Level:

0.4 V RMS Nominal

Equalization:

Special Low, Mid, and High passive type EQ.

Vintage/Classic/Warm switch (clean) Three distinct EQ voicings Classic/Modern/High gain switch (lead) Three different EQ and Gain voicings

External Footswitch Functions:

Clean or Lead channel selection and volume Boost

Dimensions (H x W x D):

17" x 19.375" x 9.250"

43.18 cm x 49.21 cm x 23.46 cm

Weight:

24.5 lbs (11.13 kg)

Features and specifications subject to change without notice.

13

Image 13
Contents Envoy 110 & Bandit Page Sound Level dBA, Slow Response Important Safety InstructionsOder weniger Wichtige SicherheitshinweiseOu inférieur Instructions Importantes DE SecuriteMenos Instrucciones Importantes Para SU SeguridadEnglish Common FeaturesVINTAGE/CLASSIC/WARM Switch VolumeClean EQ Channel Select SwitchVolume Boost CLASSIC/MODERN/HIGH Gain SwitchPower LED Lead EQSpeaker Simulated Direct Output Rear PanelExternal Speaker Jack Bandit 112 only Remote SwitchSuggested Settings Series Specifications Bandit Peavey Electronics Corporation Limited Warranty 80303158
Related manuals
Manual 11 pages 11.34 Kb Manual 32 pages 53.23 Kb

112 specifications

The Peavey 112 is a versatile and powerful guitar amplifier that caters to musicians seeking high-quality sound in a portable package. Designed for both practice and performance, the Peavey 112 excels in producing a wide range of tones suited for various genres, from rock to jazz.

One of the standout features of the Peavey 112 is its compact design, which makes it ideal for transport. With a weight of approximately 30 pounds, it is lightweight yet sturdy, allowing musicians to easily take it to gigs or rehearsals without any hassle. The amplifier comes equipped with a single 12-inch speaker, which delivers a full-bodied sound while maintaining clarity and definition across the frequency spectrum.

The Peavey 112 utilizes advanced technology to enhance its sound output. It incorporates Peavey’s proprietary TransTube technology, which emulates the warmth and responsiveness of a tube amplifier. This technology helps to produce rich harmonic overtones and a dynamic response that guitarists crave, providing an authentic amp feel whether practicing at home or performing live.

In terms of features, the Peavey 112 offers multiple channels, including a clean channel for pristine sound and an overdrive channel that allows for a more aggressive tone. The amp is equipped with EQ controls, including bass, middle, and treble, enabling musicians to sculpt their sound to their specific needs. Additionally, the inclusion of reverb adds depth to the overall sound, perfect for enhancing solos or creating atmospheric textures.

Another significant characteristic of the Peavey 112 is its built-in effects loop, which offers flexibility when integrating external effects pedals into a rig. This feature is particularly useful for guitarists who rely on multiple effects to achieve their desired sound.

Durability is also a key focus with the Peavey 112. Constructed with rugged materials, it can withstand the rigors of transport and regular use without losing performance quality. The grille cloth and speaker are designed to endure, making it a reliable choice for musicians who are always on the move.

In conclusion, the Peavey 112 stands out as a reliable and powerful amplifier that combines advanced technology with practical features. Its lightweight design, versatile tonal options, and durability make it an excellent choice for guitarists looking for quality sound in a portable package. Whether practicing, recording, or performing on stage, the Peavey 112 is equipped to meet the demands of any musician.