How to Use the RTTest Utility

Use the RTTest utility to interpret a Call Router's events and states without interruption to the running router processes. RTTest has several subroutines that allow you to view status, statistics, and similar information. You can also enable specific debug tracing in the Call Router. By running RTTest, you can quickly get a real time status of the entire ICM system.

For use with ICM Call Routers only, but can be run from any ICM component.

To Access RTTest from the Dashboard

To run RTTest from the Support Tools Dashboard:

1.Use the System Select screen to select the system you want to work with.

2.From the Dashboard menu, select Cisco Common Tools > RTTest.

3.In the Arguments field, enter desired arguments, as described in the Using section below.

Note: When entering arguments, the nmstop command is already implied. Do not enter it in the Arguments field.

4.If desired, in the Commands field, enter (or paste from a batch file) a group of commands to run in batch mode. When you do this:

ƒSeparate individual commands by a new line.

ƒDo not enter input flags.

ƒDo not enter an input file name in the arguments field.

5.Specify the command duration time or accept the default (60 seconds). This is the amount of time the command will attempt to run before terminating.

6.If desired, check Elevate Command Priority. This ensures the command will run regardless of the level of server activity.

7.Click the Run button.

To Access RTTest from a Command Line on a Node

From a command-line on an ICM Call Router, you can access RTTest from any location on the local physical drive. For example:

Cisco Support Tools 1.0 User Guide

How to Use the RTTest Utility 192

Page 192
Image 192
Cisco Systems 1.0 (1) manual How to Use the RTTest Utility, To Access RTTest from the Dashboard