Cisco Support Tools 1.0 User Guide How to Use the IPConfig -all Utility 233
How to Use the IPConfig -all Utility When you troubleshoot a TCP/IP networking problem, begin by checking the TCP/IP
configuration on the computer that is experiencing the problem.
Use the IPConfig -all command to get host computer configuration information,
including the IP address, subnet mask, and default gateway. When you use the
IPConfig command with the -all option, a detailed configuration report is produced
for all interfaces, including any configured serial ports.
To Access IPConfig -all from the Dashboard
To run IPConfig -all from the Support Tools Dashboard:
1. Use the System Select screen to select the system you want to work with.
2. From the Dashboard menu, select Cisco Common Tools > IPConfig -all.
3. Click the Run button.
Note: Because the Dashboard automatically sets the allowable commands for this
tool, the Dashboard screen for this utility does not contain a command line input
field.
Example
The following example shows sample output from the IPConfig -all command.