Cisco Systems 1.0 (1) manual How to Use the Log Groups Utility from a Command Line

How to Use the Log Groups Utility from a Command Line

Use the Create Log Group Screen to:

•Create log groups

•View details of log groups

•Edit log group definitions

•Rename log groups

•Delete log groups

To Run the Log Groups Utility from a Command Line

To run the Log Groups utility in interactive mode from a command line:

1.From a command prompt on a Support Tools node, navigate to

<support_tools_root>.

2.Enter lgtool. Optionally in the same line, to specify a different machine to serve as the application server, enter its DNS or IP address. If none is specified, the local machine serves as the application server. Press <Enter>.

3.Enter commands as described in the Command Line Options section below.

Note: For additional information on basic Web Tools command line use, including system selection options and command-line mode vs interactive mode see About Using Cisco Web Utilities from a Command Line.

Cisco Support Tools 1.0 User Guide How to Use the Log Groups Utility from a Command Line 143