Cisco Systems 1.0 (1) How to Use the PStat Utility

Cisco Support Tools 1.0 User Guide How to Use the PStat Utility 255
How to Use the PStat Utility
Use the PStat utility to list all the processes running on a Microsoft Windows NT
Workstation, including ICM processes. You can use the PStat command to verify that
an ICM process was not properly exited and is still running.
Note: You can also achieve this using the Support Tools Processes utility.
To Access PStat from the Dashboard
To run PStat from the Support Tools Dashboard:
1. Use the System Select screen to select the system you want to work with.
2. From the Dashboard menu, select Cisco Common Tools > PStat.
3. Specify the command duration time or accept the default (60 seconds). This is
the amount of time the command will attempt to run before terminating.
4. If desired, check Elevate Command Priority. This ensures the command will run
regardless of the level of server activity.
5. Click the Run button.
Note: Because the Dashboard automatically sets the allowable commands for this
tool, the Dashboard screen for this utility does not contain a command line input
field.
Example
The following example shows sample output from the PStat command.