Cisco Systems 1.0 (1) manual How to Use the OPCTest Utility, To Access OPCTest from the Dashboard

How to Use the OPCTest Utility

Use the OPCTest utility to interpret a Peripheral Gateway's (PG) status, statistics, etc. It is also possible to enable specific debug tracing in the OPC process.

For use with ICM PGs only.

To Access OPCTest from the Dashboard

To run OPCTest from the Support Tools Dashboard: To run OPCTest:

1.Use the System Select screen to select the system you want to work with.

2.From the Dashboard menu, select Cisco Common Tools > OPCTest.

3.In the Arguments field, enter desired arguments, as described in the Using section below.

Note: When entering arguments, the opctest command is already implied. Do not enter it in the Arguments field.

4.If desired, in the Commands field, enter (or paste from a batch file) a group of commands to run in batch mode. When you do this:

ƒSeparate individual commands by a new line.

ƒDo not enter input flags.

ƒDo not enter an input file name in the arguments field.

5.Specify the command duration time or accept the default (60 seconds). This is the amount of time the command will attempt to run before terminating.

6.If desired, check Elevate Command Priority. This ensures the command will run regardless of the level of server activity.

7.Click the Run button.

To Access OPCTest from a Command Line on a Node

From a command-line on an ICM PG, you can access OPCTest from any location on the local physical drive by entering: opctest /<customer_instance> /<node>

For example:

Cisco Support Tools 1.0 User Guide How to Use the OPCTest Utility 181