Cisco Systems 1.0 (1) manual Status Output Controller, Status Output Peripheral

H	Signifies that the process sends and receives internal heartbeat messages
	using the MDS protocol.
Date	Current date.
Time	Current local time.
Up-Time	In parenthesis is length of time the process has been in current state.
LastHeartBeat	If the process participates in sending and receiving MDS heartbeats, this value
	is the timestamp of the last heartbeat that was sent/received by the process.

Status Output: Controller

The second section, labeled Controller in the first column of the status output, shows the status of Cisco ICM peripheral gateway servers.

Controller is the name of the controller (ICM Peripheral Gateway) as defined in Configure initial cell rate (ICR).

Controller:	LastStateChange:	LastHeartBeat:
ATT_NIC_1,128	CFO 03/06 11:10:22 (11.2 day)	03/17 16:00:39 (3 sec)
ATT_NIC_2,129	CFO 03/11 11:07:05 (6.2 day)	03/17 16:00:34 (8 sec)
CA_PG9,9	CFO 03/17 04:42:31 (11.3 hr)	03/17 16:00:31 (11 sec)
FL_PG7,7	CFO 03/11 10:30:16 (6.2 day)	03/17 16:00:32 (10 sec)
GA_PG6,6	CFO 03/12 10:50:43 (5.2 day)	03/17 16:00:29 (13 sec)
IA_PG5,5	CFO 03/11 11:29:27 (6.1 day)	03/17 16:00:32 (10 sec)
NY_PG3,3	CFO 03/11 16:31:36 (5.9 day)	03/17 16:00:38 (4 sec)
TX_PG4,4	CFO 03/11 16:33:37 (5.9 day)	03/17 16:00:38 (4 sec)
VA_PG1,1	CFO 03/13 22:18:32 (3.7 day)	03/17 16:00:33 (9 sec)
VB_PG2,2	CFO 03/16 23:31:31 (16.4 hr)	03/17 16:00:32 (10 sec)

Within the Status Controller output, LastStateChange contains these fields:

C

F

O

Date

Time

Up-Time

Signifies that the ICM peripheral gateway server has successfully downloaded a configuration from the ICM call router.

Signifies that the ICM peripheral gateway is fully configured and the configuration is valid.

Signifies that the ICM peripheral gateway is online, and is communicating with the ICM call router.

Current date.

Current local time.

In parenthesis is length of time the process has been in current state.

Status Output: Peripheral

The third section labeled Peripheral in column 1, shows the status for third party peripherals such as ACD and VRU devices.

Peripheral is the name of the peripheral (ACD or VRU) as defined in Configure ICR.

Cisco Support Tools 1.0 User Guide How to Use the RTTest Utility 195