Cisco Systems 1.0 (1) manual How to Use the Log Collection Utility from a Command Line

How to Use the Log Collection Utility from a Command Line

Use the Log Collection utility to:

•Create a log collection

•Download collected logs

•View details of log collections

•Delete log collections

Note: The Log Collection utility can be run in interactive mode only; command-line mode is not available for this tool. For additional information on basic Web Tools command line use, including the distinction between command-line mode and interactive mode, see About Using Cisco Web Utilities from a Command Line.

To Run the Log Collection Utility from a Command Line

To run the Log Collection utility from a command line:

1.From a command prompt on a Support Tools node, navigate to

<support_tools_root>.

2.Enter lctool. Optionally in the same line, to specify a different machine to serve as the application server, enter its DNS or IP address. If none is specified, the local machine serves as the application server. Press <Enter>.

3.Enter commands as described in the Command Line Options section below.

Using the Log Collection Utility from a Command Line

Command Line Options

Command:	Description:	Example:
cmdhelp, chelp	Displays a list of commands specific to this	>cmdhelp
	utility.
	Note: Using Help or ? also displays this list, but
	includes several additional ICM commands (e.g.,
	echo, error_stop) not used by this utility.
/?	Displays syntax for a specified command.	><command> /?

Cisco Support Tools 1.0 User Guide How to Use the Log Collection Utility from a Command Line 147