Cisco Systems 1.0 (1) manual To Add a Support Tools Node to the System List

network connection to the node is active; the Support Tools Node Agent Service is installed and running on the node.

To Add a Support Tools Node to the System List

Adding a node to the system list makes it available for quick selection during future Dashboard sessions. Adding a node to the system list also specifies it as the current system.

To add a new node to the system list:

1.Click the Enter System Name radio button, and then enter the DNS entry or IP address for that node.

2.Check Add To List Of Systems.

3.Click Select System. The node is displayed as the current system at the top of the screen.

Note: If the system you attempt to select is not available, an error message

displays. Check that: the node's DNS was entered correctly; the network connection to the node is active; the Support Tools Node Agent Service is installed and running on the node.

Note: To add multiple nodes more quickly, use the System Management Screen.

See Also

For related information, see:

About Using the Dashboard for the First Time

How to Use the System Management Screen

Cisco Support Tools 1.0 User Guide How to Use the Select System Screen 77