Cisco Systems 1.0 (1) How to Use the CP Utility

Cisco Support Tools 1.0 User Guide How to Use the CP Utility 214
How to Use the CP Utility
Use the CP utility to copy files.
To Access CP from the Dashboard
To run CP from the Support Tools Dashboard:
1. Use the System Select screen to select the system you want to work with.
2. From the Dashboard menu, select Common Tools > CP.
3. In the Arguments field, enter desired arguments, as described in the Using
section below.
Note: When entering arguments, the CP command is already implied. Do not
enter it in the Arguments field.
4. Specify the command duration time or accept the default (60 seconds). This is
the amount of time the command will attempt to run before terminating.
5. If desired, check Elevate Command Priority. This ensures the command will run
regardless of the level of server activity.
6. Click the Run button.
Using CP
Syntax
cp [-ifprv?] file1 file2
cp [-ifprvd?] file1 fileN directory
If the last file is a directory, each file is copied into a file in the destination directory
with the same name.
If only two files are specified, file1 is copied to file2.
If more than two files are specified, the last file must be a directory.