Cisco Support Tools 1.0 User Guide How to Use the Procmon Utility 186
How to Use the Procmon Utility Use the Procmon utility for general-purpose ICM command-line debugging. It can be
used in conjunction with various NIC and PIM. processes. Procmon allows you to
perform actions like verifying status, setting debug trace bits, and so on.
For use with ICM PGs and Call Routers only.
To Access Procmon from the Dashboard
To run Procmon from the Support Tools Dashboard:
1. Use the System Select screen to select the system you want to work with.
2. From the Dashboard menu, select Cisco Common Tools > Procmon.
3. In the Arguments field, enter desired arguments, as described in the Using
section below.
Note: When entering arguments, the opctest command is already implied. Do
not enter it in the Arguments field.
4. If desired, in the Commands field, enter (or paste from a batch file) a group of
commands to run in batch mode. When you do this:
Separate individual commands by a new line.
Do not enter input flags.
Do not enter an input file name in the arguments field.
5. Specify the command duration time or accept the default (60 seconds). This is
the amount of time the command will attempt to run before terminating.
6. If desired, check Elevate Command Priority. This ensures the command will run
regardless of the level of server activity.
7. Click the Run button.
To Access Procmon from a Command Line on a Node
From a command-line on an ICM PG or Call Router, you can access Procmon from
any location on the local physical drive. For example:
c:\>procmon