Cisco Systems 1.0 (1) manual Example

list_agents, la: Display OPCs AgentStates for specified Group.

list_calls, lc: Display OPCs call states.

list_routing_client, lrc: Display OPCs Routing Client stats for peripheral.

mem_leaks: Dump memory leakage based on checkpoints from prior calls.

network_trunk_group_trace, ntg_trace: Controls NetworkTrunkGroup tracing in the OPC.

peripheral_trace: Controls Peripheral tracing in the OPC.

quit, q: Ends the program.

read_file, read: Directs command input to another input file

route_call: Sends a route call request to the router.

route_trace: Controls Route tracing in the OPC.

service_trace: Controls Service tracing in the OPC.

skill_group_trace: Controls SkillGroup tracing in the OPC.

status: Sends an message telling OPC to display its status.

stop_log: Requests logmsg to stop logging messages.

trunk_group_trace: Controls TrunkGroup tracing in the OPC.

tuning_param, tune: Controls tuning in the router.

Example

The following example shows detailed output for the status command:

Cisco Support Tools 1.0 User Guide How to Use the OPCTest Utility 183