Cisco Systems 1.0 (1) manual Common Utilities

opctest	Use to interpret a Peripheral	PGs
	Gateways (PG) status, statistics, etc.
	It is also possible to enable specific
	debug tracing in the OPC process.
procmon	General-purpose debugging tool. Can	PGs, Call
	be used in conjunction with various	Routers
	Network Interface Controller (NIC)
	and Peripheral Interface Manager
	(PIM) processes. Use to verify status,
	set debug trace bits, etc.
rtrtrace	Use to set various debug tracing on a	Call Routers
	CallRouter. The additional tracing is
	output to the .EMS log files, and
	viewed with the Log Collector.
rttest	Use to interpret a Call Router's events	Call Routers
	and states live without interruption to	(but can be run
	the running router processes. Rttest	from any ICM
	has several subroutines that allow	component)
	viewing status, statistics, etc. It is
	also possible to enable specific debug
	tracing in the call router.
ss7nictrace	Use to view and set various debug	PGs
	trace bits on a new style NT SS7 NIC
	PG.
vrutrace	Use to output tracing information	VRU PGs
	from a Voice Response Unit (VRU)
	device and to and from its PIM
	process. VRUTrace allows capture and
	playback of session data.

X

X

X

X

X

Common Utilities

The following Support Tools utilities are bundled third-party Windows, DOS, and Unix utilities. Most can be run both from within the Dashboard interface, or from an external command line.

Utility Name:	Description:	Installed On:	Dashboard	No
			Privileged	Dashboard or
			Users Only:	Command-
				Line Access:
Arp-a	Use to find the media access control	All Support
	address of a host on the same	Tools nodes
	physical network.
cat	Use the CAT utility to display, print,	All Support
	and combine files. Equivalent of the	Tools nodes
	DOS type command.
chmod	Use to change file permissions.	All Support
	Equivalent of the DOS attrib	Tools nodes
	command.

Cisco Support Tools 1.0 User Guide About Support Tools Utilities 20