Cisco Systems 1.0 (1) manual How to Use the NMStart Utility, To Access NMStart from the Dashboard

How to Use the NMStart Utility

Use the NMStart (Node Manager Start) utility to start an ICM service on an ICM Call Router, Logger, AW, or PG.

To Access NMStart from the Dashboard

To run NMStart from the Support Tools Dashboard:

1.Use the System Select screen to select the system you want to work with.

2.From the Dashboard menu, select Cisco Common Tools > NMStart.

3.In the Arguments field, enter desired arguments, as described in the Using section below.

Note: When entering arguments, the nmstart command is already implied. Do not enter it in the Arguments field.

4.Specify the command duration time or accept the default (60 seconds). This is the amount of time the command will attempt to run before terminating.

5.If desired, check Elevate Command Priority. This ensures the command will run regardless of the level of server activity.

6.Click the Run button.

To Access NMStart from a Command Line on a Node

From a command-line on an ICM Call Router, Logger, AW, or PG, you can access NMStart from any location on the local physical drive. For example:

c:\>nmstart

d:\temp>nmstart

Using NMStart

Syntax: nmstart <customer_instance> <node>

For example: c:\> nmstart cisco pg3a

Cisco Support Tools 1.0 User Guide How to Use the NMStart Utility 177