How to Use the RTRTrace Utility

Use RTRTrace to set debug tracing on an ICM CallRouter. The additional tracing is output to the .EMS log files, viewable with the Log Collector utility.

Router Trace session can be started on either side of a Call Router, and tracing will start logging for both sides when tracing is enabled.

RTRTrace is for use with ICM Call Routers only.

Accessing RTRTrace

RTRTrace is an external GUI application present on all ICM nodes as part of that standard ICM installation. It cannot be run from within the Support Tools dashboard. Online documentation is available from within the RTRTrace GUI.

To access RTRTrace on an ICM Call Router, from a command line, enter rtrtrace.

See Also

For related information, see:

About Cisco Common Utilities

Cisco TAC ICM Technical Notes on Cisco.com

How to Use the Log Collector Utility

Cisco Support Tools 1.0 User Guide

How to Use the RTRTrace Utility 191

Page 191
Image 191
Cisco Systems 1.0 (1) manual How to Use the RTRTrace Utility, Accessing RTRTrace