Cisco Systems 1.0 (1) - page 184

Cisco Support Tools 1.0 User Guide How to Use the OPCTest Utility 184
Debug Information
You can enable specific debugging within OPCTest by issuing the debug command.
Turning up specific tracing is much more effective than going into the registry, or
turning up the EMSTraceMask for the entire OPC process. Enabling debug control
turns up tracing on the part of OPC for that you need additional tracing. The tracing
result is displayed in the OPC EMS log files. Use the Log Collector utility to view the
output of the EMS logs.
For example:
opctest: debug /? Usage: debug_control [/realtime] [/agent] [/halfhour]
[/rcmeter] [/routing] [/skillgroup] [/closedcalls] [/cstaecr] [/cstacer]
[/pimmsg] [/ctimsg] [/rcmsg] [/dmpmsg] [/icmsg] [/opcmsg] [/mdsmsg]
[/pdmsg] [/inrcmsg] [/passthru] [/tpmsg] [/physctrlr] [/periph] [/all]
[/help] [/?]
If you need to troubleshoot a translation route problem, try the debug /routing
command.
Note: the /noall switch. Leaving tracing turned up can cause performance
problems.