Peavey PV 10, PV 14 manual Signal LED, Fader, Tape In/Out 13, EFX Select, Effect, EFX Time

Signal LED (11)

The signal LED lights when the channel level reaches approximately -20 dBu. This not only indicates which channels are active, but also serves as a mini level meter.

Fader (12)

The channel fader is the channel output control and sets the signal level to the left and right mix and the effects send control. The optimum setting is the 0 (unity gain) position.

13 14

Tape In/Out (13 & 14)

The tape input jacks are designed to accommodate tape‚ CD or computer sound card output levels. The output level is +4 dBu for connecting to a recorder or sound card input. The tape inputs can be used as an additional stereo input by engaging the Tape to Main Mix switch (27). The tape input can also be used to monitor the recorder/sound card output without the risk of feedback.

EFX Select (15)

This rotary switch selects one of sixteen available effects. See the table below for descriptions of each.

18

17

15

16

	Effect	Description	Application	Parameter
1	Hall Rev	Medium Concert Hall	Ensemble	Rev Time
2	Large Hall Rev	Larger Concert Hall Darker	Gen Reverb	Rev Time
3	Room 1 Rev	Intimate Room Bright	Pop Vocal	Rev Time
4	Room 2 Rev	Larger Room Darker	Drums, Rhythm	Rev Time
5	Plate 1 Rev	Bright	Pop Vocal	Rev Time
6	Plate 2 Rev	Darker	Drums	Rev Time
7	Cathedral	Large Space, Long and Darker	Choir	Rev Time
8	Spring	Classic Spring	Guitar	Rev Time
9	Delay 1	Single Delay (Slap-back)	Voc/Instr	Dly Time
10	Delay 2	Warm Delay with Repeats	Instruments	Dly Time
11	Delay 3	Dark Delay with Repeats	Instruments	Dly Time
12	Tape Delay	Warm Delay	Instruments	Dly Time/Feedback
13	Doubler	Single Delay, 30 - 120 ms	Instruments	Dly Time
14	Shimmer	Warm Delay with Modulation	Instruments	Dly Time
15	Vocal Enhancement 1	Brightens and adds Room Reverb	Vocals	Rev Level
16	Vocal Enhancement 2	Brightens and adds Spring Reverb	Vocals	Rev Level

EFX Time (16)

This control adjusts the time of the particular reverb or delay.

9