Furman Sound HRM-16, HDS-16 manual LIVE/STAGE Mode Default, Studio Mode

Page 4

HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM

16’s. Talkback is always available from the mix console and the level can be adjusted with the HRM-16’s TALKBACK VOLUME control.

There are two talkback modes designed for live and studio situations:

LIVE/STAGE MODE (DEFAULT)

This mode establishes communication from the HDS-16 to all HRM-16’s but not between them. Each HRM-16 user must depress their TALK button or switch to speak with the HDS-16 but can always receive from it. The HRM-16 users will not hear other HRM-16 users or their own voice. This is useful for live situations where

a single HRM-16 user’s communication with the mix engineer does not require interaction between musicians. Live/Stage was selected as the default mode to eliminate feedback from adjacent stage monitors.

STUDIO MODE

This mode establishes communication among all HRM-16’s and the HDS-16 much like an intercom system. Any HRM-16 user with their TALK button depressed can speak to all HRM- 16’s and the HDS-16. Each person will also hear their own voice.This mode is useful to enable discussion between the musicians and mix engineer between takes.

Figure 2: Detail of HDS-16 front panel: Talkback and TT inputs

3

Image 4
Contents HDS-16/HRM-16 Headphone Distribution System Features IntroductionAdditional Useful HRM-16 Features Include HDS-16 HEADPHONE/ Audio Distribution SystemFront Panel TalkbackLIVE/STAGE Mode Default Studio ModeChanging the talkback mode inside the HDS-16 Changing the Talkback Mode SoloGround lift switch has two positions Rear PanelRemote Mixer TOP PanelInput from HDS-16 HDS-16 and HRM-16 Protection CircuitsOutput to Additional Three Year Limited Warranty Service Petaluma, California 94954-6919 USA Phone Fax